Name: BAILEIGH 1008136 VM-1054-3 10" X 54" ELECTRONIC VARIABLE SPEED VERTICAL MILLING MACHINE WITH MITUTOYO 2-AXIS DRO AND X, Y & Z-AXIS POWER FEEDS & POWER DRAW BAR
Brand: BAILEIGH
SKU: 1008136
Price: 29339.00 USD
Availability: InStock

BAILEIGH 1008136 VM-1054-3 10" X 54" ELECTRONIC VARIABLE SPEED VERTICAL MILLING MACHINE WITH MITUTOYO 2-AXIS DRO AND X, Y & Z-AXIS POWER FEEDS & POWER DRAW BAR

Based on 0 reviews. - Write a review

$29,339.00

Stock: In Stock
Model: VM-1054-3
Weight: 3,007.10lb
Dimensions:
60.00in x 60.00in x 87.00in
SKU: 1008136

BAILEIGH

Add to Cart

Buy Now Question

Add to Wish List Compare this Product

This vertical milling machine has a 10" x 54" table that has been hardened, ground, polished, and coated with Turcite® B to extend life and help eliminate corrosion
This vertical milling machine is a fully variable speed through the use of a YASKAWA® inverter drive
Adjustable spindle speeds from 80 to 3,800 RPM, by selecting the right speed tooling life is lengthened and cut quality improves, both of which save money
MITUTOYO® 2-Axis digital readout system for positioning down to 1/10 of a thousandth of an inch
Powerful 3 HP | 2.23 kW motor that runs on 220V/3 Phase/60 Hz. electric power
The spindle has specified a NMTB-40 spindle taper. This type spindle is stronger and give the operator a choice of larger tooling should the need arise
Spindle head can swivel 90° right or left and 45° front or rear, the ram can revolve horizontally by an angle of 180°
3 Position - Forward | Stop | Reverse, switch to control rotation of spindle
Micro feed spindle headwheel, when engaged, this manual moves the quill down or up at slow speed
Depth stop adjusted, can be set to limit the downward travel for the quill, provides a repeatable depth of travel
Operation control box houses the lamp and coolant switches, the emergency stop button, and the power control
Electrical enclosure houses electrical components and wire terminal strips
Machine base supports milling machine and houses the coolant tank
Chip and drip tray collect chips and coolant which goes bank to tank

Table Size (W x L/In. \| mm)	10 x 54.015 \| 254 x 1,372
Spindle Taper	NMTB-40
Number of Spindle Speeds	Electronic Variable Speed
Range of Spindle Speeds (RPM)	80 - 3,800
Spindle Diameter (In. \| mm)	3.93 \| 99.82
Spindle Feed per Revolution (IPR \| MMPR)	.0015 \| .0031 \| .0051 \| .04 \| .08 \| .13
Spindle Travel (In. \| mm)	5 \| 127
Spindle Head Swivel (Right or Left \| Front or Rear)	90° \| 45°
Spindle Nose to Table (Min. - Max./In. \| mm)	1.57 - 17.51 \| 40 - 445
Spindle Center to Column (Min. - Max./In. \| mm)	7.78 - 26.77 \| 200 - 680
Table Longitudinal Travel/Manual - X-Axis (In. \| mm)	35.43 \| 900
Table Cross Travel/Manual - Y-Axis (In. \| mm)	15.74 \| 400
Table Knee Travel/Manual - Z-Axis (In. \| mm)	15.98 \| 406
Table Longitudinal Travel/Auto - X-Axis (In. \| mm)	32.28 \| 820
Table Cross Travel/Auto - Y-Axis (In. \| mm)	15.74 \| 400
Table Knee Travel/Auto - Z-Axis (In. \| mm)	15.98 \| 406
Ram Cross Travel (In. \| mm)	18.89 \| 480
Table Load Capacity (Lbs. \| Kgs.)	550 \| 250
Table T-Slots (Number @ Width/In. \| mm)	3 @ .625 \| 15.875
Spindle Motor (HP \| kW)	3 \| 2.23
Electric Power Requirement	220V/3 Phase/60 Hz.
Coolant Pump Motor (HP \| Watt)	1/8 \| 93.21
Coolant Tank Capacity (Gallons \| Liters)	7.5 - 8 \| 28.39 - 30.28
Shipping Dimensions (L x W x H/In. \| mm)	60 x 60 x 87 \| 1,524 x 1,524 x 2,210
Shipping Weight (Lbs. \| Kgs.)	3,007.1 \| 1,364
Design and specifications are subject to change without notice.