Menu
Your Cart

WELLSAW 1316S-EXT-SA 13" X 16" SEMI-AUTOMATIC SWIVEL HEAD MITER HORIZONTAL BANDSAW WITH EXTENDED CAPACITY

WELLSAW 1316S-EXT-SA 13" X 16" SEMI-AUTOMATIC SWIVEL HEAD MITER HORIZONTAL BANDSAW WITH EXTENDED CAPACITY
WELLSAW 1316S-EXT-SA 13" X 16" SEMI-AUTOMATIC SWIVEL HEAD MITER HORIZONTAL BANDSAW WITH EXTENDED CAPACITY
$18,110.00
  • Stock: In Stock
  • Model: 1316S-EXT-SA
  • Weight: 1,920.00lb
  • Dimensions:
  • 76.00in x 90.00in x 0.00in
  • SKU: 1316S-EXT-SA
  • Manufactured in the U.S.A.
  • PLC Controlled, full cycle semi-automatic operation
    The PLC controller is factory programed and manages the raise and lower functions of the saw head and the open and close functions of the vise jaw in a programmed sequence. In high volume operations this increases productivity and reduces operator fatigue and error
    Full cycle operation:
    • at the end of the cut the saw head rises to a pre-selected level
    • the vise opens
    • the operator advances the stock and presses the "Automatic" button
    • the vise closes and the saw head approaches and makes the next cut
  • Extra capacity for oversized light duty applications
  • True swivel head miters to 60° - no need to swivel the stock
  • Saw head swivels on precision ball bearings
  • Large protractor for accurate angle selection
  • Wet cutting system with full surround pan
  • Rigid welded steel frame with precision ground bed and vise jaws
  • Infinitely variable blade speeds
  • Combination reduction gearbox and perimeter ring gear blade drive
  • Powered frame raise and air powered quick position vise control
  • Variable hydraulic feed rate control with counterbalance spring
  • Zero clearance carbide guides with rollers with pre-loaded spring
  • Rite-Tension® Blade tensioning device
  • Powered blade brush
  • Auto shut-off at end of cut
  • Adjustable stock stop
  • Flood coolant system with 8 gallons tank capacity and submersible pump
  • Magnetic starter with overload and undervoltage protection
  • 110 Volts at controls
  • OSHA Blade guarding
  • Model 1316S-SA 13" x 16" Semi-Automatic Swivel Head Miter Horizontal Bandsaw shown
Cutting Capacity at 90°:
Round (H/In.)
Rectangle (H x W/In.)

13
13 x 18
Cutting Capacity at 45°:
Round (H/In.)
Rectangle (H x W/In.)

13
13 x 18
Cutting Capacity at 60°:
Round (H/In.)
Rectangle (H x W/In.)

13
13 x 14-1/2
Blade Speeds - Infinitely Variable (SFPM) 70 - 375
Blade Size (W x THK x L/In.) 1 x .035 x 150
Blade Wheel Size - Cast Iron (Diameter/In.) 15
Stock Stop Projection (In.) 25
Bed Height (In.) 35
Coolant Tank Capacity (Gallons) 8
Main Motor (HP) 3,
230V/3 Phase/60 Hz.
Floor Area Dimensions (W x L/In.) 90 x 76
Shipping Weight (Lbs.) 1,920
Design and specifications are subject to change without notice.
  • 1"W x .035" THK x 150"L Tiger-Tooth® Bi-Metal Blade
  • Adjustable Stock Stop
  • Work Light with 250VA Transformer
  • Coolant System
  • 5'L x 18"W Infeed Roller Conveyor
  • 2 HP Motor - 115V/1 Phase/60 Hz.
  • 2 HP Motor - 208V/1 Phase/60 Hz.
  • 2 HP Motor - 230V/1 Phase/60 Hz.
  • 3 HP Motor - 208V/3 Phase/60 Hz.
  • 3 HP Motor - 460V/3 Phase/60 Hz.
  • Frequency Type Variable Band Speed Drive - AC Motor
  • Blade Break - Stall Switch
  • Laser Line Pointer
  • Flush Hose Kit with Hi-Output Pump
  • Casters with 2 Locking - Set of 4
  • NFPA Electrics - NEMA Type 1 Lever Type Fused Disconnect
  • NFPA Electrics - NEMA Type 12 Rotary Type Fused Disconnect
  • MQL Lubricant System - Minimum Quantity "Near Dry"
  • 1 Gallon Lubricant for MQL System
  • Leveling Vibration Mounts
  • Overhead Bundle Clamp Air Powered with Manual Control
  • 18" Wide Roller, 250 Pounds Capacity Medium Duty Stock Stand
  • 6" Wide Roller, 1,000 Pounds Capacity Heavy Duty Stock Stand
  • 12" Wide Roller, 1,000 Pounds Capacity Heavy Duty Stock Stand
  • 5'L x 18"W, 35" Bed Height, 2 Legs, 3,300 Pounds Capacity Non-Powered Roller Conveyor
  • 10'L x 18"W, 35" Bed Height, 3 Legs, 3,300 Pounds Capacity Non-Powered Roller Conveyor
  • 5'L x 24"W, 35" Bed Height, 2 Legs, 3,300 Pounds Capacity Non-Powered Roller Conveyor
  • 10'L x 24"W, 35" Bed Height, 3 Legs, 3,300 Pounds Capacity Non-Powered Roller Conveyor
This website uses cookies to ensure you get the best experience on our website. This use may include analytics, personalization and ads. Learn More