Menu
Your Cart

DOALL DC-280SA 11" X 11-3/4" CONTINENTAL SERIES SEMI-AUTOMATIC HORIZONTAL PRODUCTION COLUMN BAND SAW

DOALL DC-280SA 11" X 11-3/4" CONTINENTAL SERIES SEMI-AUTOMATIC HORIZONTAL PRODUCTION COLUMN BAND SAW
DOALL DC-280SA 11" X 11-3/4" CONTINENTAL SERIES SEMI-AUTOMATIC HORIZONTAL PRODUCTION COLUMN BAND SAW
$29,876.00
  • Stock: In Stock
  • Model: DC-280SA
  • Weight: 2,646.00lb
  • Dimensions:
  • 48.00in x 83.00in x 60.00in
  • SKU: DC-280SA
  • This Continental Series™ production horizontal column band saw is designed for cutting a wide range of metals on a production basis
  • An affordable semi-automatic band saw is the perfect choice if not require indexing, high production or automatic cutting cycles, do cut single pieces extremely efficiently
  • It can set a desired feed rate, blade speed and initial vise opening, a cut is complete, the band shuts off and the head returns to the upright open position and locks. Then the operator must manually reposition the material for another cut
  • PLC - Programmable logic controller control for all electric and hydraulic functions
  • Control panel
    • Touch screen control
    • Ease of operation
    • Multiple language capability
    • Trouble shooting prompts
  • Infinitely variable speed controlled by variable frequency drive
  • Speed transmission by worm gear and shaft
  • High efficiency transmission
    • Double connected belt
    • Avoid slipping
    • Easy belt replacement
    • Transmits full power to the saw blade
    • High efficiency gearbox
    • Highest grade materials decrease wear and lower operating temperatures
  • Two-step full stroke vises with split front vise and variable vise pressure control
    • Combines the advantage of rack and full stroke
    • Shorter hydraulic cylinders reduces overall machine footprint
    • Holds workpiece on both sides of the blade
    • Reduces vibration
    • Reduces remnant length
    • Controls vise pressure
    • Prevents crushing and deformation of thin walled tubing
  • Hydraulic blade tension
    • Automatically sets blade tension and reduces when machine stops
    • Allows for higher cutting efficiency and longer blade life
  • Blade shockproof device
    • Anti-vibration device decreases vibration and noise
    • Quieter cutting
    • Increased blade life
  • Idle wheel motion detector with blade stalling and breakage shutoff
  • Back-up bearing and inserts
    • Guides the blade with smoother movement and less friction
    • Increases blade life
    • Decreases noise while cutting
  • Efficiently designed hydraulic system
    • Provides optimum and smooth system function and accessibility
    • Increased accuracy
    • Increased component life
    • Ease of maintenance
  • Coolant through carbide-faced saw guide inserts
    • Supports and supplies coolant to the blade
    • Straighter cuts
    • Longer blade life
  • Power driven, coolant flushed, blade cleaning wire brush
  • Flushing hose and auxiliary coolant nozzles
  • Hydraulic chip conveyor
    • Automatically removes chips
    • Ease of maintenance
  • Band door interlocks enhanced operator safety
  • Manual length setting
Cutting Capacity at 90°:
Round (Diameter/In. | mm)
Rectangle (H x W/In. | mm)

11 | 280
11 x 11-3/4 | 280 x 300
Bundle Cutting Capacity at 90°:
Minimum (W x H/In. | mm)
Maximum (W x H/In. | mm)

6-1/2 x 5/8 | 165 x 15
9-7/8 x 4 | 250 x 100
Band Speed (FPM | MPM) 66 - 262 | 20 - 80
Blade Wheel Diameter (In. | mm) 16.34 | 415
Blade Size (W x THK x L/In. | mm) 1-1/4 x .042 x 151 | 32 x 1.1 x 3,820
Material Pass Line Height (In. | mm) 27-1/2 | 700
Table Load Capacity (Maximum/Lbs. | Kg) 11,464 | 5,200
Main Motor (HP | kW) 5 | 3.75,
230V/3 Phase/60 Hz.
Hydraulic System Motor (HP | kW) 1 | .75
Hydraulic System Capacity (Gallons | Liters) 16 | 60
Coolant Fluid System Motor (HP | kW) 1/4 | .18
Coolant Fluid System Capacity (Gallons | Liters) 20 | 75.7
Overall Dimensions (W x L x H/In. | mm) 83.07 x 47.63 x 59.84 | 2,110 x 1,210 x 1,520
Net Weight (Lbs. | Kg) 2,645.54 | 1,200
Design and specifications are subject to change without notice.
  • One 1-1/4"W x .042" THK x 151"L x 3/4 TPI Vari-Tooth Bi-Metal Saw Blade
  • Work Light
  • One 6.6' | 2000 mm L x 11" | 280 mm W Gravity Conveyor
  • Complimentary Cutting Fluids Package
  • Set Up Tools and Tool Box
  • Operator's Instruction and Parts Manuals
  • Powered Roller and Hydraulic Cylinder Length Setting
  • Magnetic Wand Chip Remover
  • 6.6' | 2000 mm L x 11" | 280 mm W Gravity Conveyor
  • 10' | 3,000 mm L x 11" | 280 mm W Gravity Conveyor
This website uses cookies to ensure you get the best experience on our website. This use may include analytics, personalization and ads. Learn More