Menu
Your Cart

BAILEIGH 1019108 VM-949E-VS 9" X 49" VARIABLE SPEED VERTICAL MILLING MACHINE WITH 2-AXIS DRO AND X-AXIS POWER FEED

BAILEIGH 1019108 VM-949E-VS 9" X 49" VARIABLE SPEED VERTICAL MILLING MACHINE WITH 2-AXIS DRO AND X-AXIS POWER FEED
BAILEIGH 1019108 VM-949E-VS 9" X 49" VARIABLE SPEED VERTICAL MILLING MACHINE WITH 2-AXIS DRO AND X-AXIS POWER FEED
$10,695.00
  • Stock: In Stock
  • Model: VM-949E-VS
  • Weight: 2,350.12lb
  • Dimensions:
  • 65.00in x 67.00in x 79.00in
  • SKU: 1019108
  • This knee mill has a familiar old-school feel, while having many creature comforts not typically found in this market range
  • Perfect for hobbyists, small shops, and professionals alike
  • Powerful 3 HP | 2.23 kW motor that runs on 220V/1 Phase/60 Hz. electric power
  • 2-Axis Digital readout system displays positioning functions for machine tool processing
  • Power feed X-axis with rapid - consistent travel speed without tiresome cranking
  • Meehanite® casting, rigid and dependable for decades of use
  • Variable spindle speed by adjustable sheaves | pulleys control spindle RPM with the turn of a handle
  • Infinitely adjustable variable speed from 70 to 4,320 RPM allows tooling to run at its intended speed, resulted in longer tool life and better finishes
  • R8 Spindle and drawbar accepts the most common tooling
  • Spindle head can swivel 90° right or left and 45° front or rear, the ram can revolve horizontally by an angle of 180°
  • Spindle brake, easier tool changes and quick spindle stops
  • 3-Speed power quill feed with manual wheel, perfect for boring and accurate, consistent work
  • Dovetail ways with adjustable gibs keep tolerances tight year after year
  • Leadscrews with backlash adjustable nuts remove backlash instead of compensating
  • Way covers and wipers keep chips off ways and bed
  • LED Work light
  • One-shot lubricator keeps up on lubrication maintenance by simply pulling a lever
  • Integrated coolant system with splash guard, large 6 gallons | 22.71 liters reservoir in the base houses the pump, plumbed return line from the table eliminates overflow and messes
Table Size (W x L/In. | mm) 9.055 x 49.055 | 230 x 1,246
Spindle Taper R-8
Number of Spindle Speeds Infinitely Variable Speed
Range of Spindle Speeds (RPM) 70 - 4,320
Spindle Diameter (In. | mm) 3.375 | 85.725
Spindle Feed per Revolution (IPR | MMPR) .0014 | .0029 | .0079 | .038 | .076 | .203
Spindle Travel (In. | mm) 5 | 127
Spindle Head Swivel (Right or Left | Front or Rear) 90° | 45°
Spindle Nose to Table (Min. - Max./In. | mm) 1.653 - 15.944 | 42 - 405
Table Longitudinal Travel with X-Axis Power Feed (In. | mm) 29.33 | 745
Table Longitudinal Travel - X-Axis (In. | mm) 32.283 | 820
Table Cross Travel - Y-Axis (In. | mm) 12.007 | 305
Table Knee Travel - Z-Axis (In. | mm) 15.984 | 406
Ram Cross Travel (In. | mm) 12.007 | 305
Table Load Capacity (Lbs. | Kgs.) 771.61 | 350
Table T-Slots (Number @ Width/In. | mm) 3 @ .629 | 16
Table Surface to Floor (Min. - Max./In. | mm) 33.976 - 50 | 863 - 1,270
Spindle Motor (HP | kW) 3 | 2.23
Electric Power Requirement 220V/1 Phase/60 Hz.
Coolant Pump Motor (HP | Watt) 1/16 | 46.6
Coolant Fluid Capacity (Gallons | Liters) 6 | 22.71
Shipping Dimensions (L x W x H/In. | mm) 65 x 66.96 x 78.97 | 1,651 x 1,701 x 2,006
Machine Weight (Lbs. | Kgs.) 2,204.62 | 1,000
Shipping Weight (Lbs. | Kgs.) 2,350.12 | 1,066
Design and specifications are subject to change without notice.
  • 2-Axis Digital Readout System
  • X-Axis Power Feed
  • 7/16" - 20 TPI Draw Bar
  • Way Covers
  • LED Work Lamp
  • One Shot Lubrication System
  • Coolant Hose with Clamps
  • Chip and Coolant Tray
  • Operation Control Box
  • Tool Box with Tools
This website uses cookies to ensure you get the best experience on our website. This use may include analytics, personalization and ads. Learn More