Menu
Your Cart

BAILEIGH 1020696 VM-1054E-VS 10" X 54" VARIABLE SPEED VERTICAL MILLING MACHINE WITH 2-AXIS DRO AND X & Y-AXIS POWER FEEDS & POWER DRAW BAR

BAILEIGH 1020696 VM-1054E-VS 10" X 54" VARIABLE SPEED VERTICAL MILLING MACHINE WITH 2-AXIS DRO AND X & Y-AXIS POWER FEEDS & POWER DRAW BAR
BAILEIGH 1020696 VM-1054E-VS 10" X 54" VARIABLE SPEED VERTICAL MILLING MACHINE WITH 2-AXIS DRO AND X & Y-AXIS POWER FEEDS & POWER DRAW BAR
$16,689.00
  • Stock: In Stock
  • Model: VM-1054E-VS
  • Weight: 3,000.49lb
  • Dimensions:
  • 68.00in x 72.00in x 75.00in
  • SKU: 1020696
  • An ISO 40 taper for the spindle to help improve performance as well, a larger spindle is stronger and has tighter tolerances over a longer period of time
  • Rigidity is very important on a mill that is why this mill went with only the best castings to make the base and frame
  • Powerful 3 HP | 2.23 kW motor that runs on 220V/3 Phase/60 Hz. electric power
  • 2-Axis Digital readout system displays positioning functions for machine tool processing, accurate to 1/10 of 1 thousandth of an inch
  • Variable spindle speed milling machine that runs from 60 to 4,200 RPM by selecting the right speed tooling life is lengthened and cut quality improves, both of which save money
  • Spindle head can swivel 90° right or left and 45° front or rear, the ram can revolve horizontally by an angle of 180°
  • Spindle brake, easier tool changes and quick spindle stops
  • 3-Speed power quill feed with manual wheel, perfect for boring and accurate, consistent work
  • The table that has been hardened, ground, polished, and coated with Turcite® B coating to extend life and help eliminate corrosion
  • Leadscrews with backlash adjustable nuts remove backlash instead of compensating
  • All three axis are powered to making easy on the operator
  • Way covers and wipers keep chips off ways and bed
  • Halogen Work light
  • A flood coolant system, air draw bar, and central lubrication system are all factory installed
Table Size (W x L/In. | mm) 10 x 53.937 | 254 x 1,370
Spindle Taper ISO-40
Number of Spindle Speeds Infinitely Variable Speed
Range of Spindle Speeds (RPM) 60 - 4,200
Spindle Diameter (In. | mm) 3.346 | 85
Spindle Feed per Revolution (IPR | MMPR) .0029 | .0014 | .0079 | .076 | .038 | .203
Spindle Travel (In. | mm) 5 | 127
Spindle Head Swivel (Right or Left | Front or Rear) 90° | 45°
Spindle Nose to Table (Min. - Max./In. | mm) 4.015 - 17.007 | 102 - 432
Table Longitudinal Travel - X-Axis (In. | mm) 32.007 | 813
Table Cross Travel - Y-Axis (In. | mm) 13.779 | 350
Table Knee Travel - Z-Axis (In. | mm) 12.992 | 330
Ram Cross Travel (In. | mm) 20 | 508
Table Load Capacity (Lbs. | Kgs.) 749.57 | 340
Table T-Slots (Number @ Width/In. | mm) 3 @ .629 | 16
Draw Bar Size (In. - TPI) 5/8 - 11
Power Draw Bar Air Supply (PSI | Kg/cm²) 90 | 6.32
Spindle Motor (HP | kW) 3 | 2.23
Electric Power Requirement 220V/3 Phase/60 Hz.
Coolant Pump Motor (HP | Watt) 1/16 | 46.6
Coolant Fluid Capacity (Gallons | Liters) 5.28 | 20
Z-Axis Motor (HP | Watt) 1/2 | 372.85
Shipping Dimensions (L x W x H/In. | mm) 67.99 x 72 x 75 | 1,727 x 1,829 x 1,905
Machine Weight (Lbs. | Kgs.) 2,799.87 | 1,270
Shipping Weight (Lbs. | Kgs.) 3,000.49 | 1,361
Design and specifications are subject to change without notice.
  • 2-Axis Digital Readout System
  • X-Axis Power Feed
  • Y-Axis Power Feed
  • 5/8" - 11 TPI Draw Bar
  • Way Covers
  • Halogen Work Lamp
  • One Shot Lubrication System
  • Coolant Hose with Clamps
  • Chip and Coolant Tray
  • Operation Control Box
  • Tool Box with Tools
This website uses cookies to ensure you get the best experience on our website. This use may include analytics, personalization and ads. Learn More