Menu
Your Cart

JET 698074 JTM-1254VS 12" X 54" VARIABLE SPEED VERTICAL MILLING MACHINE WITH NEWALL DP700 3-AXIS (KNEE) DRO AND X & Y-AXIS POWER FEEDS

JET 698074 JTM-1254VS 12" X 54" VARIABLE SPEED VERTICAL MILLING MACHINE WITH NEWALL DP700 3-AXIS (KNEE) DRO AND X & Y-AXIS POWER FEEDS
JET 698074 JTM-1254VS 12" X 54" VARIABLE SPEED VERTICAL MILLING MACHINE WITH NEWALL DP700 3-AXIS (KNEE) DRO AND X & Y-AXIS POWER FEEDS
$34,071.43
  • Stock: In Stock
  • Model: JTM-1254VS
  • Weight: 3,260.00lb
  • Dimensions:
  • 104.00in x 80.00in x 92.00in
  • SKU: 698074
  • CSA/CUS Certified
  • Certified Meehanite® casting with enhanced ribbing ensures rigidity and tolerance retention
  • Precision bored and honed milling head
  • High precision Class 7 spindle bearings support the spindle for maximum rigidity in heavy cutting applications
  • Spindle head is internally cooled extending bearing, belt and motor life
  • Large diameter quill is chromed
  • Heavy-duty spindle brake stops the spindle and interrupts the power, preventing accidental start-ups for added safety
  • Quick spindle feed nut
  • Three-stage power downfeed with automatic stop
  • Spindle guard protect operator from flying debris
  • Hardened and precision ground table and ways up to 54 HRC for greater accuracy
  • The X and Y-axis are coated with Turcite-B for reduced vibration and smooth movements
  • Dovetail way on X-axis and square ways on Y and Z-axis
  • Adjustable gibs throughout
  • Dual locks on all movable surfaces
  • Emergency stop is located on a swing away control box moves all major functions at the operators fingertips
  • The electrical box has been relocated to the back of the mill and houses two 115V outlets for powered accessories
  • Automatic lubrication every 180 minutes with a flow of 3 to 6 cc/cy reduces maintenance
  • The innovative design of the machine base provides an easier solution to leveling the machine without raising it up off the floor
  • Internal coolant tank built into casting base for use with coolant system, coolant pump not included
Table Size (W x L/In.) 12 x 54
Spindle Taper NMTB-40
Diameter of Quill (In.) 4-1/8
Number of Spindle Speeds Mechanical Variable Speed
Range of Spindle Speeds (RPM) 80 - 3,800
Quill Down Feed Rates (IPR) .003 - .008 - .0015
Spindle Travel (In.) 5
Head Movement (Right or Left) 90°
Maximum Distance Spindle Nose to Table (In.) 23
Maximum Distance Spindle Center to Column (In.) 26-1/2
Minimum Distance Spindle Center to Column (In.) 7-1/2
Collet Capacity (In.) 1/8 - 1
Maximum Table Longitudinal Travel (In.) 28-1/4
Maximum Table Cross Travel (In.) 15-1/3
Maximum Knee Travel (In.) 19-1/4
Maximum Ram Travel (In.) 20-3/8
Number of T-Slots 3
Size of T-Slots (W x D/In.) 5/8 x 3/4
Distance Between T-Slot Centers (In.) 2-1/2
Maximum Work Table Weight Capacity (Lb.) 925
Saddle Width (In.) 25-5/8
Column Width (In.) 14-1/4
Main Motor (HP) 5,
230V/460V/3 Phase/60 Hz.,
Prewired 230V
Overall Dimensions (W x D x H/In.) 104-1/4 x 79-7/8 x 92-1/8
Net Weight (Lbs.) 3,260
Shipping Weight (Lbs.) 3,969
Design and specifications are subject to change without notice.
  • NEWALL DP700 3-Axis (X, Y and Knee) DRO Milling Machine Package Installed
  • X-Axis Power Feed Installed
  • Y-Axis Power Feed Installed
  • Swing Away Safety Shield
  • LED Work Lamp
  • Chip Pan
  • Automatic Lubrication System
  • Way Covers
  • Draw Bar
  • Tool Box with Tools
  • External Coolant Pump Assembly
This website uses cookies to ensure you get the best experience on our website. This use may include analytics, personalization and ads. Learn More