Menu
Your Cart

JET 321492 GH-1880ZX 18" X 80" LARGE SPINDLE BORE ENGINE LATHE WITH ACU-RITE 203 2-AXIS DRO AND 5C LEVER TYPE COLLET CLOSER

JET 321492 GH-1880ZX 18" X 80" LARGE SPINDLE BORE ENGINE LATHE WITH ACU-RITE 203 2-AXIS DRO AND 5C LEVER TYPE COLLET CLOSER
JET 321492 GH-1880ZX 18" X 80" LARGE SPINDLE BORE ENGINE LATHE WITH ACU-RITE 203 2-AXIS DRO AND 5C LEVER TYPE COLLET CLOSER
$52,784.29
  • Stock: In Stock
  • Model: GH-1880ZX
  • Weight: 6,590.00lb
  • Dimensions:
  • 136.00in x 44.00in x 66.00in
  • SKU: 321492
  • 3-1/8" Bore spindle is supported by two tapered and one ball bearings
  • Chrome molybdenum headstock gears are hardened, ground and shaved
  • Meehanite castings are used for added durability
  • One piece cast iron base absorbs vibration allowing heavier cuts
  • High quality ANSI Class 50 wear resistant cast iron bed ways are hardened and ground for durability
  • Removable gap allows large diameter work
  • Universal gearbox allows inch, metric, diametral and module pitch threads, no change gears required
  • Five position automatic carriage stop increases productivity
  • Carriage features one-shot lubrication and Turcite B on bed sliding surfaces
  • Centrally located controls with jog button
  • E-Stop on carriage for added safety
  • Large easy to use foot brake
  • Shown model number GH-1860ZX Lathe
Maximum Swing Over Bed (In.) 18
Maximum Swing Over Cross Slide (In.) 11
Swing Through Gap (In.) 27-1/2
Length of Gap (In.) 12
Distance Between Centers (In.) 80
Spindle Bore (In.) 3-1/8
Spindle Mount D1-8
Spindle Taper with Sleeve MT-7 (MT-5)
Number of Spindle Speeds 12
Range of Spindle Speeds (RPM) 25 - 1,800
Number of Longitudinal Feeds 122
Range of Longitudinal Feeds (IPR) .0015 - .0913
Number of Cross Feeds 122
Range of Cross Feeds (IPR) .0006 - .0365
Number of Inch Threads 61
Range of Inch Threads (TPI) 1-5/8 - 72
Number of Metric Threads 24
Range of Metric Threads (mm) .05 - 20
Number of Diametral Pitch Threads 45
Range of Diametral Pitch Threads (D.P.) 3-1/4 - 96
Number of Modular Pitch Threads 20
Range of Modular Pitch Threads (M.P.) 0.25 - 10
Maximum Tool Size (In.) 1 x 1
Maximum Compound Slide Travel (In.) 5-1/8
Maximum Cross Slide Travel (In.) 9
Maximum Carriage Travel (In.) 74-5/16
Tailstock Spindle Travel (In.) 5
Taper in Tailstock Spindle MT-5
Follow Rest Capacity (In.) 1/2 - 3-1/2
Steady Rest Capacity (In.) 3/8 - 7-3/4
Width of Bed (In.) 13-1/8
Main Motor (HP) 7-1/2,
230V/460V/3 Phase/60 Hz.,
Prewired 230V
Overall Dimensions (L x W x H/In.) 136 x 44 x 66
Weight (Lbs.) 6,590
Design and specifications are subject to change without notice.
  • ACU-RITE 203 2-Axis DRO Lathe Package Installed
  • 5C Lever Type Collet Closer Installed
  • 10" 3-Jaw Scroll Chuck with Top Reversing Jaws
  • 16" Face Plate
  • Large Capacity Steady Rest with Ball Bearing Tips
  • Follow Rest
  • 5-Piece Quick Change Tool Post Set
  • Articulating LED Work Lamp
  • Fully Integrated Coolant System
  • Full Length Splash Guard and Coolant Return
  • Electronic Chuck Key Holder
This website uses cookies to ensure you get the best experience on our website. This use may include analytics, personalization and ads. Learn More