Menu
Your Cart

JET 690643 JTM-1050EVS2/230 10" X 50" ELECTRONIC VARIABLE SPEED VERTICAL MILLING MACHINE WITH NEWALL DP700 3-AXIS (KNEE) DRO AND X, Y & Z-AXIS POWER FEEDS

JET 690643 JTM-1050EVS2/230 10" X 50" ELECTRONIC VARIABLE SPEED VERTICAL MILLING MACHINE WITH NEWALL DP700 3-AXIS (KNEE) DRO AND X, Y & Z-AXIS POWER FEEDS
JET 690643 JTM-1050EVS2/230 10" X 50" ELECTRONIC VARIABLE SPEED VERTICAL MILLING MACHINE WITH NEWALL DP700 3-AXIS (KNEE) DRO AND X, Y & Z-AXIS POWER FEEDS
$21,135.71
  • Stock: In Stock
  • Model: JTM-1050EVS2/230
  • Weight: 2,486.00lb
  • Dimensions:
  • 66.00in x 63.00in x 86.00in
  • SKU: 690643
  • CSA/CUS Certified
  • Certified Meehanite® casting with enhanced ribbing ensures rigidity and tolerance retention
  • Precision bored and honed milling head
  • High precision Class 7 spindle bearings support the spindle for maximum rigidity in heavy cutting applications
  • Spindle head is internally cooled extending bearing, belt and motor life
  • Large diameter quill is chromed
  • Heavy-duty spindle brake stops the spindle and interrupts the power, preventing accidental start-ups for added safety
  • Quick spindle feed nut
  • One piece quill pinion and shaft
  • Three-stage power downfeed with automatic stop
  • Hardened and precision ground table and ways up to 54 HRC for greater accuracy
  • The X and Y-axis are coated with Turcite-B for reduced vibration and smooth movements
  • Adjustable gibs throughout
  • Dual locks on all movable surfaces
  • Inverter drive system and emergency stop are located on a swing away control box moves all major functions at the operators fingertips
  • The electrical box has been relocated to the back of the mill and houses two 115V outlets for powered accessories
  • Automatic lubrication every 30 minutes with a flow of 3 to 6 cc/cy reduces maintenance
  • The innovative design of the machine base provides an easier solution to leveling the machine without raising it up off the floor
  • Internal coolant tank built into casting base for use with coolant system, coolant pump not included
  • Shown with NEWALL DP700 2-Axis DRO Milling Machine Package installed
Table Size (W x L/In.) 10 x 50
Spindle Taper R8
Diameter of Quill (In.) 3-3/8
Number of Spindle Speeds Electronic Variable Speed
Range of Spindle Speeds (RPM) 60 - 4,500
Quill Down Feed Rates (IPR) .0015 - .003 - .006
Spindle Travel (In.) 5
Head Movement (Right or Left | Front or Back) 90° | 45°
Maximum Distance Spindle Nose to Table (In.) 20-3/4
Maximum Distance Spindle Center to Column (In.) 26-3/4
Minimum Distance Spindle Center to Column (In.) 4-3/4
Collet Capacity (In.) 1/8 - 7/8
Maximum Table Longitudinal Travel (In.) 29-7/8
Maximum Table Cross Travel (In.) 14-3/4
Maximum Knee Travel (In.) 16-1/8
Maximum Ram Travel (In.) 17-3/8
Number of T-Slots 3
Size of T-Slots (W x D/In.) 5/8 x 3/4
Distance Between T-Slot Centers (In.) 2-1/2
Maximum Work Table Weight Capacity (Lb.) 840
Saddle Width (In.) 20
Column Width (In.) 11-3/8
Main Motor (HP) 3,
230V/3 Phase/60 Hz.
Overall Dimensions (W x D x H/In.) 66 x 63 x 86
Net Weight (Lbs.) 2,486
Shipping Weight (Lbs.) 2,618
Design and specifications are subject to change without notice.
  • NEWALL DP700 3-Axis (X, Y and Knee) DRO Milling Machine Package Installed
  • X-Axis Power Feed Installed
  • Y-Axis Power Feed Installed
  • Z-Axis Power Feed Installed
  • Swing Away Safety Shield
  • LED Work Lamp
  • Chip Pan
  • Automatic Lubrication System
  • Way Covers
  • Draw Bar
  • Tool Box with Tools
  • External Coolant Pump Assembly
This website uses cookies to ensure you get the best experience on our website. This use may include analytics, personalization and ads. Learn More