Menu
Your Cart

DOALL TDC-400CNC 16" X 16" OLYMPIA SERIES AUTOMATIC HORIZONTAL DUAL COLUMN CNC TUBE AND PIPE METAL CUTTING BAND SAW

SHIPPING & DELIVERY
Call us now
Ask a question
DOALL TDC-400CNC 16" X 16" OLYMPIA SERIES AUTOMATIC HORIZONTAL DUAL COLUMN CNC TUBE AND PIPE METAL CUTTING BAND SAW
DOALL TDC-400CNC 16" X 16" OLYMPIA SERIES AUTOMATIC HORIZONTAL DUAL COLUMN CNC TUBE AND PIPE METAL CUTTING BAND SAW
Based on 0 reviews. - Write a review
$47,600.00
  • Stock: In Stock
  • Model: TDC-400CNC
  • Weight: 2,866.00lb
  • Dimensions:
  • 102.00in x 102.00in x 72.00in
  • SKU: TDC-400CNC
DOALL DOALL
Add to Cart
Buy Now Question
Add to Wish List Compare this Product
  • This Olympia™ series horizontal automatic, dual column, CNC metal cutting band saw specially designed to cut standard tube and pipe
  • This band saw offers bundling to save time and money in high production environments like metal service centers and also classified as a horizontal power specialty tube cut-off saw
  • It offers a large variety of optional accessories are available to customize the machine for specific sawing requirements
  • SAW-MICRO control system with 8-bit processor controls each movements and programs
  • The control system features the length and number of pieces are set on the control panel. The machine selects the number of feeds and performs the necessary calculations by itself. The system allows the selection from 9 different settings for quick adjustment of lengths or automatic modification of lengths when sawing several dimensions from one bar. There is an automatic and a semi-automatic mode, where all movements are controlled independently
  • Regulation of shaft speed, moving to cut, is manual and uses throttle valve placed beside control panel. Automatic safety regulation of shift speed BRP - overfeed protection function. Machine will stop after exceeding set loading, defined in amperes. The controlling panel is equipped with a safety button, which stops the saw, and another two buttons for turning it on. There is buttons, which control the various available movements necessary for managing the SAW-MICRO tool
  • The saw is equipped with safety red button for emergency stop and manual regular of arm
  • The saw blade is at a 10° cant for high efficiency cutting on a wide range of structural shapes and configurations of tubing
  • Band speeds range 65 - 328 FPM | 20 - 100 MPM
  • Variable frequency drive
  • Hydraulic band tension
  • Pulley driven band brush
  • Automatic guide arm setting
  • Work height sensor
  • Overfeed protection
  • Variable vise pressure control - set of 2
  • Discharge chute
  • Worm chip conveyor
  • Flood coolant system
Cutting Capacity at 90°, Tube | Solid:
Round (Diameter/In. | mm)
Rectangle (H x W/In. | mm)
15.74 | 9.84 | 400 | 250
15.74 x 15.74 | 400 x 400
Maximum Bundle Capacity at 90° (H x W/In. | mm) 13.38 x 15.74 | 340 x 400
Minimum Bundle Capacity at 90° (H/In. | mm) 1.18 | 30
Remnant Length Drop (In. | mm) 5.9 | 150
Blade Speed (FPM | MPM) 65 - 328 | 20 - 100
Blade Wheel Diameter (In. | mm) TBA
Blade Size (W x THK x L/In. | mm) 1-1/4 x .042 x 178 | 34 x 1.1 x 4,520
Material Pass Line Height (In. | mm) 31-1/2 | 800
Auto Index Single Stroke (Minimum - Maximum/In. | mm) .118 - 19.88 | 3 - 505
Auto Index Multiple Stroke (Maximum/In. | mm) 394 | 9,999
Feed System Hydraulic Control
Blade Guides Carbide Faced
Main Motor (HP | kW) 4 | 3,
230V/3 Phase/60 Hz.
Hydraulic Pump Motor (HP | kW) 1 | .75
Coolant Pump Motor (HP | kW) .12 | .09
Coolant Tank Capacity (Gallons | Liters) 15.85 | 60
Floor Space Dimensions Required (W x L x H/In. | mm) 102.36 x 102.36 x 71.45 | 2,600 x 2,600 x 1,815
Machine Weight (Lbs. | Kg) 2,866 | 1,300
Design and specifications are subject to change without notice.
  • SAW-MICRO Saw Control
  • One 1-1/4"W x .042" THK x 178"L x 2/4 TPI Vari-Tooth Bi-Metal Saw Blade
  • Pulley Driven Band Brush
  • Work Light
  • Worm Chip Conveyor
  • Flood Coolant System
  • Tool Kit
  • Complimentary Cutting Fluids Package
  • Operator's Instruction and Parts Manuals
  • Mist-style Saw Band Lubrication - Factory Installed
  • Laser Line Generator - Factory Installed
  • Worm Chip Conveyor - Factory Installed
  • Hydraulic Front and Rear Vise for Nesting - Set of 2 - Factory Installed
  • Power Driven Band Brush - Factory Installed
  • 3.3' | 1000 mm Input Conveyor with Drip Pan | Gutter - 17.75" | 450 mm Cylinder Width, 672 Lbs./Ft. | 1000 Kg./M Capacity
  • 3.3' | 1000 mm Output Conveyor with Drip Pan | Gutter - 17.75" | 450 mm Cylinder Width, 672 Lbs./Ft. | 1000 Kg./M Capacity
  • 3.3' | 1000 mm Output Conveyor with Drip Pan | Gutter - 17.75" | 450 mm Cylinder Width, 672 Lbs./Ft. | 1000 Kg./M Capacity - Used to Connect RDT and Vise
  • 6.6' | 2000 mm Powered Hydraulic Lift Conveyor with Separate Controller - 17.75" | 450 mm Cylinder Width, 672 Lbs./Ft. | 1000 Kg./M Capacity
  • 6.6' | 2000 mm Input Filler Conveyor with Drip Pan | Gutter - 16.5" | 420 mm Cylinder Width, 168 Lbs./Ft. | 250 Kg./M Capacity
  • 6.6' | 2000 mm Output Filler Conveyor with Drip Pan | Gutter - 16.5" | 420 mm Cylinder Width, 168 Lbs./Ft. | 250 Kg./M Capacity
  • 6.6' | 2000 mm Input Conveyor with Drip Pan | Gutter - 17.75" | 450 mm Cylinder Width, 672 Lbs./Ft. | 1000 Kg./M Capacity
  • 6.6' | 2000 mm Output Conveyor with Drip Pan | Gutter - 17.75" | 450 mm Cylinder Width, 672 Lbs./Ft. | 1000 Kg./M Capacity
  • Additional Conveyor Rollers for RDT
  • Single Adjustable Horizontal Conveyor Roller - 470 Lbs./Ft. | 700 Kg./M Capacity
  • Single Fixed Vertical Guide Roller - 11" | 280 mm Cylinder Height - Attaches to RDT for Operation
  • Single Adjustable Vertical Guide Roller - Adjusts Up to 17.75" | 450 mm Cylinder Width - 11" | 280 mm Cylinder Height - Requires RBR for Operation
  • Chip Pan with Drain
  • Cut Piece Collection Box with Drain
  • Handle for Chip Pan or Collection Box
  • Magnetic Wand Chip Remover
  • Wear Parts Service Kit
  • Start-up Kit - 6 Saw Blades, Vernier Caliper, Heavy-duty Work Gloves, Refractometer, Work Apron, Safety Glasses, Squeegee, Magnetic Wand Chip Remover and Ball Cap
This website uses cookies to ensure you get the best experience on our website. This use may include analytics, personalization and ads. Learn More