Menu
Your Cart

DOALL DCDS-750NC 19" X 30" STRUCTURALL SERIES AUTOMATIC HORIZONTAL DUAL COLUMN DUAL SWIVEL MITER METAL CUTTING BAND SAW

SHIPPING & DELIVERY
Call us now
Ask a question
DOALL DCDS-750NC 19" X 30" STRUCTURALL SERIES AUTOMATIC HORIZONTAL DUAL COLUMN DUAL SWIVEL MITER METAL CUTTING BAND SAW
DOALL DCDS-750NC 19" X 30" STRUCTURALL SERIES AUTOMATIC HORIZONTAL DUAL COLUMN DUAL SWIVEL MITER METAL CUTTING BAND SAW
Based on 0 reviews. - Write a review
$108,200.00
  • Stock: In Stock
  • Model: DCDS-750NC
  • Weight: 9,149.00lb
  • Dimensions:
  • 232.00in x 130.00in x 85.00in
  • SKU: DCDS-750NC
DOALL DOALL
Add to Cart
Buy Now Question
Add to Wish List Compare this Product
  • This StructurALL® series horizontal automatic numeric controlled indexing, dual column, dual mitering metal cutting band saw is ideal for high production sawing of a large variety of materials including, but not limited to, structural solids, stainless and tool steel
  • This hydraulically controlled band saw has a double-swivel head that is able to miter | angle cut at 60° both left and right for a fabricator cutting multiple angles in the same work piece
  • It offers high loading capacity and a large variety of optional accessories are available to customize the machine for specific sawing requirements
  • SIEMENS PLC control with touch screen display system controls automatic regulation of the cutting feed rate and electronic setting of upper and down position of the arm
  • The control system displays blade speed, cutting feed and a state of single working movements and inputs | outputs for the connection of optional accessories
  • The machine enables to work with two modes:
    • Semi-automatic Cycle - The machine cuts the material immediately in a semi-automatic mode. The operator uses the feeder of the
    machine for the manipulation with the material and for the exact feed of the material into the cutting zone. The movement of the
    feeder is realized by manual buttons or by GTO function. After starting GTO function the operator sets the position of the feeder,
    presses START button and feeder goes to the set position
    • Automatic Cycle - The feeder feeds the material according to the set program. The operator sets the cutting program, machine
    realizes these programs, and it is possible to make 99 different programs. The part of one program is a complete setting of the cut,
    blade speed, feed speed, setting of an automatic regulation, setting of the height of the bar to be cut, setting of the length of the
    bar and number of pieces. The length and number of pieces it is possible to set in 99 lines, the machine feeds differently set
    lengths automatically. Cutting feed rate is regulated by hydraulic throttle valve leaded by servo motor enabling very precise feed
    rate. The operator sets in the program needed feed rate - mm | min, and the machine will set it up. In this way there are no external
    factors influencing cutting feed like temperature - viscosity of hydraulic oil
    Two basic regimes of automatic system regulation - ASR:
    • RZP Indicator - System allows to set the optimal cutting feed rate depending on material band position. Cutting feed rate is
    regulated on beginning and end of cut. It is suitable for using of carbide blades
    • ARP Indicator - System of the automatic regulation of the cutting feed rate depending on the cutting resistance of the material
    or blunting the blade
    • System offers two basic modes of ARP:
    • Bi-metal mode is suitable for optimization of the cutting feed when cutting profiles by bi-metal blades. The cutting feed is higher
    if the blade cuts sides of the profile. As the blade reaches the full material, the system reduces the cutting feed automatically
    so that teeth gap of the blade would not be filled
    • Carbide mode is suitable for cutting of full bars. If the blade is excessive loaded is the cutting feed reduced on 50% and cut is
    finished by this speed. Safety module with auto diagnostics
  • Band speeds range 65 - 328 FPM | 20 - 100 MPM
  • Automatic feed control
  • Variable vise pressure control - set of 2
  • Safety covers and 3 panel work area surround
  • Hydraulic angular position and lock
  • Digital read out of cutting angle
  • Pulley driven band brush
  • Hydraulic band tension
  • Feed rate indicator
  • Automatic guide arm setting
  • Flood coolant system
Cutting Capacity at 90°, Tube | Solid:
Round (Diameter/In. | mm)
Rectangle (H x W/In. | mm)
19.68 | 15.74 | 500 | 400
18.89 x 29.52 | 480 x 750
Cutting Capacity at 45° - Right, Tube | Solid:
Round (Diameter/In. | mm)
Rectangle (H x W/In. | mm)
19.68 | 11.02 | 500 | 280
19.68 x 18.89 | 500 x 480
Cutting Capacity at 60° - Right, Tube | Solid:
Round (Diameter/In. | mm)
Rectangle (H x W/In. | mm)
12.99 | 7.87 | 330 | 200
12.99 x 18.89 | 330 x 480
Cutting Capacity at 45° - Left, Tube | Solid:
Round (Diameter/In. | mm)
Rectangle (H x W/In. | mm)
19.68 | 11.02 | 500 | 280
19.68 x 18.89 | 500 x 480
Cutting Capacity at 60° - Left, Tube | Solid:
Round (Diameter/In. | mm)
Rectangle (H x W/In. | mm)
11.81 | 7.48 | 300 | 190
11.81 x 18.89 | 300 x 480
Maximum Bundle Capacity at 90° (H x W/In. | mm) 10.23 x 29.52 | 260 x 750
Minimum Bundle Capacity at 90° (H/In. | mm) 3.34 | 85
Miter Cutting - Right | Left 0° - 60° | 0° - 60°
Minimum Butt End (W/In. | mm) 4.72 | 120
Blade Speed (FPM | MPM) 65 - 328 | 20 - 100
Blade Wheel Diameter (In. | mm) TBA
Blade Size (W x THK x L/In. | mm) 1-1/2 x .05 x 256 | 41 x 1.3 x 6,500
Material Pass Line Height (In. | mm) 32 | 815
Vise Hydraulic
Index System Electromotor and Gearbox
Blade Guides Carbide Faced
Main Motor (HP | kW) 7-1/2 | 5.5,
460V/3 Phase/60 Hz.
Hydraulic Pump Motor (HP | kW) 3 | 2.2
Hydraulic Tank Capacity (Gallons | Liters) 3.4 | 13
Coolant Pump Motor (HP | kW) .16 | .12
Coolant Tank Capacity (Gallons | Liters) 10-1/2 | 40
Floor Space Dimensions Required (W x L x H/In. | mm) 141.73 x 231.49 x 94.48 | 3,600 x 5,880 x 2,400
Machine Weight (Lbs. | Kg) 9,149 | 4,150
Design and specifications are subject to change without notice.
  • SIEMENS Control with Touch Screen Display
  • One 1-1/2"W x .05" THK x 256"L x 2/4 TPI Vari-Tooth Bi-Metal Saw Blade
  • Digital Read Out of Cutting Angle
  • Pulley Driven Band Brush
  • Feed Rate Indicator
  • Variable Vise Pressure Control - Set of 2
  • Hydraulic Band Tension
  • Hydraulic Angular Position and Lock
  • Safety Covers and 3 Panel Work Area Surround
  • Work Light
  • Flood Coolant System
  • Tool Kit
  • Complimentary Cutting Fluids Package
  • Operator's Instruction and Parts Manuals
  • Mist-style Saw Band Lubrication - Factory Installed
  • Laser Line Generator - Factory Installed
  • Chain Chip Conveyor with Pan - Factory Installed
  • Front and Rear Vise for Nesting - Set of 2 - Factory Installed
  • Power Driven Band Brush - Factory Installed
  • Free Standing 7 Panel Work Area Gate
  • 10' | 3000 mm Heavy Duty Indexer Travel Extension with Drip Pan | Gutter
  • 6.6' | 2000 mm Heavy Duty Indexer Travel Extension with Drip Pan | Gutter
  • 3.3' | 1000 mm Input Conveyor with Drip Pan | Gutter - 31.5" | 800 mm Cylinder Width, 1142 Lbs./Ft. | 1700 Kg./M Capacity
  • 3.3' | 1000 mm Output Conveyor with Drip Pan | Gutter - 31.5" | 800 mm Cylinder Width, 1142 Lbs./Ft. | 1700 Kg./M Capacity
  • 3' | 900 mm Powered Hydraulic Lift Conveyor with Independent Control Panel - 31.5" | 800 mm Cylinder Width
  • 3' | 900 mm Powered Hydraulic Lift Output Conveyor for Angle Cutting with Independent Control Panel - 31.5" | 800 mm Cylinder Width
  • 6.6' | 2000 mm Input Filler Conveyor with Drip Pan | Gutter - 30.7" | 780 mm Cylinder Width, 235 Lbs./Ft. | 350 Kg./M Capacity
  • 6.6' | 2000 mm Output Filler Conveyor with Drip Pan | Gutter - 30.7" | 780 mm Cylinder Width, 235 Lbs./Ft. | 350 Kg./M Capacity
  • 6.6' | 2000 mm Input Conveyor with Drip Pan | Gutter - 31.5" | 800 mm Cylinder Width, 1142 Lbs./Ft. | 1700 Kg./M Capacity
  • 6.6' | 2000 mm Output Conveyor with Drip Pan | Gutter - 31.5" | 800 mm Cylinder Width, 1142 Lbs./Ft. | 1700 Kg./M Capacity
  • 2.6' | 800 mm Input Conveyor for Angle Cutting with Drip Pan | Gutter - 31.5" | 800 mm Cylinder Width, 1142 Lbs./Ft. | 1700 Kg./M Capacity
  • Single Fixed Vertical Guide Roller - 11" | 280 mm Cylinder Height - Mounts to RDT
  • Single Adjustable Vertical Guide Roller - Movable Up to 31.5" | 800 mm Cylinder Width, 11" | 280 mm Cylinder Height
  • Single Adjustable Horizontal Conveyor Roller - 1543 Lbs./Ft. | 700 Kg./M Capacity
  • Additional Conveyor Rollers
  • Magnetic Wand Chip Remover
  • Cut Piece Collection Box with Drain
  • Chip Pan with Drain
  • Handle for Chip Pan or Collection Box
  • Wear Parts Service Kit
  • Start-up Kit - 6 Saw Blades, Vernier Caliper, Heavy-duty Work Gloves, Refractometer, Work Apron, Safety Glasses, Squeegee, Magnetic Wand Chip Remover and Ball Cap
This website uses cookies to ensure you get the best experience on our website. This use may include analytics, personalization and ads. Learn More