Menu
Your Cart

DOALL 6000680 2013-V2 20" X 13" VERTICAL CONTOUR BAND SAW WITH 13" WORK HEIGHT

DOALL 6000680 2013-V2 20" X 13" VERTICAL CONTOUR BAND SAW WITH 13" WORK HEIGHT
DOALL 6000680 2013-V2 20" X 13" VERTICAL CONTOUR BAND SAW WITH 13" WORK HEIGHT
$12,000.00
  • Stock: In Stock
  • Model: 2013-V2
  • Weight: 1,250.00lb
  • Dimensions:
  • 55.08in x 44.39in x 80.17in
  • SKU: 6000680
  • This vertical contour metal cutting band saw features variable pulley drive controls that start the motion of the band wheels slowly to reduce mechanical shock and increase drive train life
  • This band saw is among the most versatile sawing machines on the market today. It can cut aluminum, brass, copper, mild steel, tough tool steel, stainless steel and sheet metal, as well as non-metals like plastics and fibrous materials
  • It is widely used in machine shops, maintenance departments, schools and other areas where cutting a wide variety of materials is required
  • It offers a wide variety of available accessories that have been engineered to provide versatility and productivity, provides close tolerance machining and reliable operation
  • Arc-welded steel unitized frame
  • Variable frequency AC drive which provides variable band speeds, soft start and dynamic brake functions that rapidly stops motion when power is shut-off
  • Aluminum blade wheels with crowned rubber tires
  • Job selector
  • Band speed indicator
  • Band tension indicator
  • Band door interlocks
  • Dual range transmission
  • Post elevating hand wheel
  • Chip blower
  • Chip box
  • Conforming to the basic requirements of N.E.C. standards NFPA Bul #79 with door interlocked non-fused safety switch, also containing motor contactor and overload, control transformer above 110 Volt and fuse, oil tight push buttons and selector switch, contact blocks, band door interlock switches
Cutting Capacity at 90°:
Round (Diameter/In. | mm)
Rectangle (H x W/In. | mm)

13 | 330
20 x 13 | 510 x 330
Throat Depth - Band to Column (Max./In. | mm) 20 | 508
Work Height Capacity (Max./In. | mm) 13 | 330.2
Blade Drive Variable Frequency AC
Blade Speeds (SFPM | MPM) Low Range: 55 - 320 | 17 - 100
High Range: 550 - 5,200 | 168 - 1,585
Table Size (L x W/In. | mm) 25.98 x 25.98 | 660 x 660
Table Tilts (Left | Right) 10° | 45°
Table Stroke (In. | mm) 10.74 | 273
Table Load Capacity (Lbs. | Kg) 500 | 227
Material Pass Line Height (In. | mm) 39.06 | 992.2
Table T-Slots Number | Size - Optional (Number/In. | mm) 2 | 1/2 | 13
Blade Width (Min. - Max./In. | mm) 1/16 - 1 | 1.5 - 25.4
Blade Length (In. | mm) 154.01 | 3,912
Band Wheels Diameter (In. | mm) 20.07 | 510
Upper Wheel Adjustment (In. | mm) 3 | 76
Balde Guides - Standard Tool Steel
Blade Guides - Optional Carbide
Main Motor (HP | kW) 2 | 1.5,
208V/230V/460V/3 Phase/60 Hz.,
Please Specify
Floor Space Dimensions Required (W x L x H/In. | mm) 44.38 x 55.07 x 80.16 | 1,127.5 x 1,399 x 2,036.3
Net Weight (Lbs. | Kg) 1,250.02 | 567
Design and specifications are subject to change without notice.
  • One 1/2"W x .035" THK x 154"L x 6 TPI Bi-Metal Saw Blade
  • One Set of High Speed Insert Type Saw Guide Blocks for 1/16" to 1/2" | 1.5 mm to 13 mm Bands
  • One Set of Steel Saw Guide Inserts for 1/4" | 6 mm, 3/8" | 9 mm and 1/2" | 13 mm Bands
  • Variable Frequency AC Drive
  • Job Selector
  • Band Speed Indicator
  • Band Tension Indicator
  • Band Door Interlocks
  • Dual Range Transmission
  • Post Elevating Hand Wheel
  • Work Light
  • Chip Blower - Plant Air Required
  • Chip Box
  • Wrench for Saw Guides
  • Wrench for Table Trunnion
  • Transmission Oil
  • Instruction and Parts Manuals on CD or USB Data Stick
  • Voltage Wiring for 575V/3 Phase/60 Hz.
  • Work Holding Jaws
  • Air Powered Work Table
  • Mist Lubricator
  • Magnetic Wand Chip Remover
  • Extended Traverse Work Table - 1,100 Lb. Capacity, (4) 2" T-Slots, 34"L x 42"W | 860 mm L x 1070 mm W Table Area, Reduces Work Height by 4" Approximately
  • Extended Work Heights - 6", 12" and 18"
  • DBW-15 Welder with Grinder and Blade Shear - Column Mounted 240 Volt or Below
  • DBW-15 Welder with Grinder and Blade Shear - Column Mounted Above 240 Volt
  • Work Holding Jaw with Handles
  • Magnifying Attachment - Attaches to Work Light, Not Available on CE Models
  • Disk Cutting Attachment - 2-1/2" - 30" | 65 mm - 760 mm Diameter Capacity
  • International Escutcheons - Matric Dials and Indicators
  • Standard Rip Fence - Attaches to 26" x 26" | 660 mm x 660 mm Table
  • No. 2 Standard Cut-off and Mitering Attachment for 26" x 26" | 660 mm x 660 mm Table
  • High Speed Saw Guide Blocks Less Inserts Per Pair for 1/16" - 1/2" | 1.5 mm - 13 mm, Speeds to 6,000 FPM | 1,830 MPM Bands
  • Heavy Duty High Speed Saw Guide Blocks Less Inserts Per Pair for 1/16" - 1/2" | 1.5 mm - 13 mm, Speeds to 6,000 FPM | 1,830 MPM Bands
  • Heavy Duty High Speed Saw Guide Blocks Less Inserts Per Pair for 5/8" - 3/4" | 16 mm - 19 mm, Speeds to 6,000 FPM | 1,830 MPM Bands
  • Heavy Duty High Speed Saw Guide Blocks Less Inserts Per Pair for 1" | 27 mm, Speeds to 6,000 FPM | 1,830 MPM Band
  • Heavy Duty High Speed Saw Guide Blocks with Carbide Faced Backup Less Inserts Per Pair for 1/16" - 1/2" | 1.5 mm - 13 mm, Speeds to 6,000 FPM | 1,830 MPM Bands
  • Heavy Duty High Speed Saw Guide Blocks with Carbide Faced Backup Bearings Less Inserts Per Pair for 5/8" | 16 mm and 3/4" | 19 mm, Speeds to 6,000 FPM | 1,830 MPM Bands
  • Heavy Duty High Speed Saw Guide Blocks with Carbide Faced Backup Bearings Less Inserts Per Pair for 1" | 27 mm, Speeds to 6,000 FPM | 1,830 MPM Band
  • Type l High Speed Roller Saw Guide Blocks Less Rollers Per Pair
  • Rollers - Type l, Set of 4 for 1/4" | 6 mm Saw Band Width
  • Rollers - Type l, Set of 4 for 3/8" | 9 mm Saw Band Width
  • Rollers - Type l, Set of 4 for 1/2" | 13 mm Saw Band Width
  • Type ll High Speed Roller Saw Guide Blocks Less Rollers Per Pair - Reduces Work Height 1" | 27 mm and Restricts Table Tilt to 27°
  • Rollers - Type ll, Set of 4 for 1/4" | 6 mm Saw Band Width
  • Rollers - Type ll, Set of 4 for 3/8" | 9 mm Saw Band Width
  • Rollers - Type ll, Set of 4 for 1/2" | 13 mm Saw Band Width
  • Rollers - Type ll, Set of 4 for 5/8" | 16 mm Saw Band Width
  • Rollers - Type ll, Set of 4 for 3/4" | 19 mm Saw Band Width
  • Rollers - Type ll, Set of 4 for 1" | 27 mm Saw Band Width
  • Set of 4 Tungsten Carbide Single Faced Saw Guide Inserts for Any Single Saw Band Width - 1/4" | 6 mm, 3/8" | 10 mm, 1/2" | 13 mm, 5/8" | 16 mm, 3/4" | 19 mm, 1" | 27 mm
  • Set of 4 Hardened Tool Steel Reversible Saw Guide Inserts for Any Single Saw Band Width - 1/8" | 3 mm, 3/16" | 5 mm, 1/4" | 6 mm, 3/8" | 10 mm, 1/2" | 13 mm, 5/8" | 16 mm, 3/4" | 19 mm, 1" | 27 mm
  • Start-up Kit - 6 Saw Blades, Vernier Caliper, Heavy-duty Work Gloves, Work Apron, Safety Glasses, Squeegee, Magnetic Wand Chip Remover and Ball Cap
This website uses cookies to ensure you get the best experience on our website. This use may include analytics, personalization and ads. Learn More