Name: BAILEIGH 1020694 VM-836E-1 8" X 36" STEP PULLEY VERTICAL MILLING MACHINE
Brand: BAILEIGH
SKU: 1020694
Price: 9689.00 USD
Availability: InStock

BAILEIGH 1020694 VM-836E-1 8" X 36" STEP PULLEY VERTICAL MILLING MACHINE

Based on 0 reviews. - Write a review

$9,689.00

Stock: In Stock
Model: VM-836E-1
Weight: 1,951.09lb
Dimensions:
48.00in x 60.00in x 85.00in
SKU: 1020694

BAILEIGH

Add to Cart

Buy Now Question

Add to Wish List Compare this Product

The perfect mill for getting into machining for milling, drilling, tapping, boring, and reaming
This small but powerful machine offers many features for a fraction of the cost
Perfect for the machine shop or even a garage at the house
Operates on 110V/1 Phase/60 Hz. electric power for any environment
Uses a step pulley system that allows adjustment to the speed from 80 to 2,720 RPM
Being able to tune the speed of the quill is important to prolong the life of the tooling and saving money
Headstock can tilt 90° right or left, the ram can revolve horizontally by an angle of 180°
R-8 Spindle taper is standard, allows a wide variety of tooling that is readily available in just about any tooling store
3 Position - Forward | Stop | Reverse, switch to control rotation of spindle
Micro feed spindle headwheel, when engaged, this manual moves the quill down or up at slow speed
Depth stop adjusted, can be set to limit the downward travel for the quill, provides a repeatable depth of travel
Operation control box houses the lamp and coolant switches, the emergency stop button, and the power control
Electrical enclosure houses electrical components and wire terminal strips
Machine base supports milling machine and houses the coolant reservoir

Table Size (W x L/In. \| mm)	7.874 x 36.02 \| 200 x 915
Spindle Taper	R-8
Number of Spindle Speeds	8
Range of Spindle Speeds (RPM)	80 - 2,720
Spindle Diameter (In. \| mm)	3.149 \| 80
Spindle Feed per Revolution (IPR \| MMPR)	.0033 \| .0017 \| .0055 \| .086 \| .045 \| .142
Spindle Travel (In. \| mm)	5 \| 127
Spindle Head Tilt (Right or Left)	90°
Spindle Center to Column (Min. - Max./In. \| mm)	5.236 - 15.748 \| 133 - 400
Spindle Nose to Table (Min. - Max./In. \| mm)	.877 - 15.629 \| 22.3 - 397
Table Longitudinal Travel - X-Axis (In. \| mm)	25.51 \| 648
Table Cross Travel - Y-Axis (In. \| mm)	9.625 \| 244.5
Table Knee Travel - Z-Axis (In. \| mm)	14.72 \| 374
Ram Cross Travel (In. \| mm)	12 \| 305
Table Load Capacity (Lbs. \| Kgs.)	749.57 \| 340
Table T-Slots (Number @ Width/In. \| mm)	3 @ .629 \| 16
Table T-Slots Between Centers (In. \| mm)	2.5 \| 63.5
Collet Capacity (In. \| mm)	1/8 - 7/8 \| 3.175 - 22.225
Spindle Motor (HP \| kW)	2 \| 1.49
Electric Power Requirement	120V/1 Phase/60 Hz.
Coolant Pump Motor (HP \| Watt)	1/16 \| 46.6
Coolant Fluid Capacity (Gallons \| Liters)	3.96 \| 15
Floor Space Dimensions (L x W x H/In. \| mm)	48.03 x 90 x 95 \| 1,220 x 2,286 x 2,413
Shipping Dimensions (L x W x H/In. \| mm)	48.03 x 60 x 85 \| 1,220 x 1,524 x 2,159
Machine Weight (Lbs. \| Kgs.)	1,675.5 \| 760
Shipping Weight (Lbs. \| Kgs.)	1,951.09 \| 885
Design and specifications are subject to change without notice.