Menu
Your Cart

SCOTCHMAN 013910 DO70/110-24M 70 TON HYDRAULIC IRONWORKER

SHIPPING & DELIVERY
Call us now
Ask a question
SCOTCHMAN 013910 DO70/110-24M 70 TON HYDRAULIC IRONWORKER
SCOTCHMAN 013910 DO70/110-24M 70 TON HYDRAULIC IRONWORKER
Based on 0 reviews. - Write a review
$34,490.00
  • Stock: In Stock
  • Model: DO70/110-24M
  • Weight: 3,800.00lb
  • Dimensions:
  • 65.00in x 30.00in x 72.13in
  • SKU: 013910
SCOTCHMAN SCOTCHMAN
Add to Cart
Buy Now Question
Add to Wish List Compare this Product
  • Made in the U.S.A.
  • 70 Ton punch station, dual operator, 5 stations
  • This dual operator ironworker allows two operators to perform two different fabricating functions simultaneously
  • On non-Scotchman dual operator models, the punch station must be used as one of the two functions. On the Scotchman, the punch can be used as one if needed, but it is not required
  • Designed with a hydraulic system that has two pumps to ensure full hydraulic pressure and full speed when two functions are running at full capacity
  • The tool table design and the wide variety of optional tools available give it more versatility and flexibility than any other ironworker machine on the market
  • Four built-in features including a 70-ton punch, 1-1/16" in 3/4", the largest capacity angle shear for a 70-ton on the market, 6" x 6" x 1/2", a 24" plate shear, 1" x 6" up to 3/8" x 24" and a rectangle notcher. Combining these features with the large tool table for quick change of optional tooling
  • Two adjustable electric stroke controls with scale
  • Two electric remote foot pedals
  • Adjustable swing-away stripper
  • Keyed punch ram for safety
  • Punch jog control
  • Notcher table with guides
  • Shear table with miter fence
  • Tool table work area
  • Slug receptacles
  • Two 2-stage hydraulic pumps, two valves
  • Electrical box supplied with emergency palm button and lock-out tag-out accommodations
  • All guards to comply with ANSI B 11-5 standards
  • Three-year parts warranty
Rated on 65,000 PSI Tensile
A36 Mill Steel
Punching Pressure (U.S. Ton | Metric Ton) 70 | 63
Punch Capacity (Diameter in Thickness/In. | mm) 1-1/8 in 3/4 | 28 in 20
Special Tooling Maximum Diameter (In. | mm) 4 | 100
Throat Depth (L/In. | mm) 9 | 228.6
Flat Bar Shear
Pressure (U.S. Ton | Metric Ton)
Capacity - Sabre Blade - Standard (L | THK x W/In. | mm)
110 | 100
24 | 600
1 x 6 | 3/4 x 10 | 1/2 x 14 | 3/8 x 24 |
25 x 150 | 18 x 250 | 12 x 350 | 10 x 600
Angle Shear Capacity (H x W x THK/In. | mm)
@ 90°
@ 45° with Bar Shear
6 x 6 x 1/2 | 150 x 150 x 12
3 x 3 x 3/8 | 4 x 4 x 1/2 |
75 x 75 x 10 | 100 x 100 x 12
Brake Capacity (U.S. Ton | Metric Ton)
12"
24"
65 | 59
45 | 40
Open End Brake Capacity:
Flat | Angle Iron (Max./THK x W/In. | mm)
1/4 x 6 | 6 x 150
Pipe Notcher Capacity:
Schedule 40 (I.D./In. | mm)

3/4 | 1 | 1-1/4 | 1-1/2 | 2 |
19 | 25 | 32 | 38 | 50
90° V-Notcher Capacity:
Punch Station (L x W x THK/In. | mm)
6 x 6 x 5/16 | 150 x 150 x 8
Notcher Capacity:
Rectangle (W x D x THK/In. | mm)

90° V-Notcher - Notcher Station (L x W x THK/In. | mm)
Notching in Leg of Channel (L/In. | mm)
3 x 5 x 3/8 | 3 x 4 x 1/2 |
75 x 125 x 10 | 75 x 100 x 12
3 x 3 x 3/8 | 75 x 75 x 10
6 - 10 | 150 - 250
Channel Shear Capacity:
Adjustable (In. | mm)
2 - 6 | 50 - 150
Strut Shear Capacity (In. | mm) Samples Required
Rod Shear Capacity:
Round (Dia./In. | mm)

Square (L x W/In. | mm)
1/4 - 1-1/4 | 6 - 32
9 Cavity
1/4 x 1/4 - 1 x 1 | 6 x 6 - 25 x 25
1 Cavity
Tube Shear Capacity:
Square (H x W/In. | mm)

Thickness (Gauge | mm)
1/2 x 1/2 - 2 x 2 |
12 x 12 - 50 x 50
12 | 2.75
Picket Tool Capacity:
Square (H x W/In. | mm)

Thickness (Gauge | mm)
1/2 x 1/2 | 3/4 x 3/4 | 1 x 1 |
12 x 12 | 19 x 19 | 25 x 25
16 | 1.6
Offset Die Holder (U.S. Ton | Metric Ton) 40 | 36
Strokes per Minute in Light Material - Punch Station (SPM | Stroke/In.) 47 | 1/4
Strokes per Minute in Heavy Material - Punch Station (SPM | Stroke/In.) 16 | 3/4
Hydraulics (PSI | BAR) 3,000 | 3,000 | 207 | 179
Main Motor (HP) 10,
230V/3 Phase/60 Hz.
Overall Dimensions (L x W x H/In.) 65 x 30 x 72-1/8
Shipping Weight (Lbs.) 3,800
Design and specifications are subject to change without notice.
  • Die Holder Complete with 2" Die Insert
  • 1-1/4" Maximum Diameter Round Punch and Die
  • Punch Gauging Table with Fence and Scale
  • Punch Nut with Wrench and Stripper
  • Adjustable Swing-Away Stripper
  • Notcher Table with Guides
  • Shear Table with Miter Fence
  • Tool Table Work Area
  • Mandrel Tube Punch - Custom Tooling
  • Flatten and Trim Tube Punch - Custom Tooling
  • Round Tube Punch - Custom Tooling
  • 12" Brake with 2" V Dies for 1/4" Material
  • 24" Brake with 2" V Dies for 1/4" Material
  • 12" Brake Length Gauge with Scale
  • 24" Brake Length Gauge with Scale
  • 12" Brake Table with Scale and Squaring Arm
  • 24" Brake Table with Scale and Squaring Arm
  • Open End Brake - Maximum 1/4"THK x 5"W Flat or Angle Iron
  • Brake Dies - 1" to 4" V Openings
  • Pipe Notcher Housing - Separate Dies for Each Size
  • 3/4" Schedule 40 Pipe Die Set
  • 1" Schedule 40 Pipe Die Set
  • 1-1/4" Schedule 40 Pipe Die Set
  • 1-1/2" Schedule 40 Pipe Die Set
  • 2" Schedule 40 Pipe Die Set
  • Tool Table Pusher for Pipe Notcher
  • Punch Pusher for Pipe Notcher
  • 6"L X 6"W X 5/16"THK 90° V-Notcher
  • 2" to 6" Adjustable Channel Shear - Maximum 5" Standard Channel
  • Up to 1-1/4" Round or 1" Square Rod Shear
  • 1/2" to 2" 12 Gauge Maximum Square Tube Shear
  • Picket Tool Housing Mounts in The Punch Station Only - Separate Dies for Each Size
  • 1/2" 14 Gauge Maximum Upper and Lower Dies
  • 3/4" 14 Gauge Maximum Upper and Lower Dies
  • 1" 14 Gauge Maximum Upper and Lower Dies
  • #45 Retaining Nut - Punching from 1-9/32" to 1-9/16"
  • Heavy Duty Retaining Nut - Punching from 1-19/32" to 4"
  • Wrench for Heavy Duty Retaining Nut
  • Die Insert for 2-1/2" O.D. Dies
  • Die Insert for 3" O.D. Dies
  • Oversized Die Holder for 6" x 6" Dies
  • Offset Die Holder for Flange Punching - 2" O.D. Dies Only, Maximum 40 Tons
  • Urethane Stripper Assembly - Works with #40 Tooling Only - Maximum Diameter 1-1/4". Will NOT Work with The Offset Die Holder
  • 66° Angle Blade - 4" x 3-1/2", 3-1/2" x 3", 3" x 2-1/2"
  • 70° Angle Blade - 4" x 3", 2-1/2" x 2", 2" x 1-1/2"
  • 74° Angle Blade - 6" x 4", 5" x 3-1/2", 3" x 2"
  • 80° Angle Blade - 6" x 3-1/2", 5" x 3"
  • Upper Angle Blade Quick Change Hardware
  • 6" x 6" x 1/2" Angle Shear
  • 22° and 45° Angle Iron Miter Guide
  • Strut Shear
  • 3/8" x 2" x 7" Maximum Weld Coupon Bender
  • Punch Table Extension
  • 36"/40" LH Multi-Loc Punch Gauging Extension with 3 Vertical Stop Blocks - Material Thickness 16 Gauge to 3/4"
  • 36"/40" RH Multi-Loc Punch Gauging Extension with 3 Vertical Stop Blocks - Material Thickness 16 Gauge to 3/4"
  • 85"/90" LH Multi-Loc Punch Gauging Extension with 6 Vertical Stop Blocks - Material Thickness 16 Gauge to 3/4"
  • 85"/90" RH Multi-Loc Punch Gauging Extension with 6 Vertical Stop Blocks - Material Thickness 16 Gauge to 3/4"
  • Tool Table Extension with Punch and Die Storage Rack
  • Punch and Die Storage Rack
  • 48" Deluxe Back Gauge
  • 48" Electric Back Gauge - Shear Station Only
  • 24"W x 5'L Infeed Conveyor with Support Arms
  • Work Light - Factory Install
  • Laser Light for Bar Shear
  • Laser Light for Bar Shear - Factory Install
  • #40 and #82 Round Punch and Die Package:
    11/32", 15/32", 17/32", 19/32", 21/32", 23/32", 25/32", 27/32", 29/32", 31/32", 1-1/32", 1-3/16"
  • Deluxe #40 Punch and #82 Die Package:
    Rounds - 1/4", 9/32", 5/16", 3/8", 13/32", 7/16", 1/2", 9/16", 5/8", 11/16", 3/4", 13/16", 7/8", 15/16", 1", 1-1/16", 1-1/8", 1-3/16", 1-1/4"
    Squares - 1/2", 3/4", 7/8"
    Ovals - 9/32" x 3/4", 5/16" x 3/4", 9/32" x 1", 5/16" x 1", 13/32" x 1", 7/16" x 1", 17/32" x 1", 9/16" x 1", 9/16" x 1-1/4", 11/16" x 1-1/4", 13/16" x 1-1/4"
  • 12" Brake Package: 12" Brake, Brake Length Gauge with Scale and 12" Brake Table with Scale and Squaring Arm
  • 24" Brake Package: 24" Brake, Brake Length Gauge with Scale and 24" Brake Table with Scale and Squaring Arm
  • Pipe Notcher Package: Housing, 1-1/4" Schedule 40 Pipe Dies, 1-1/2" Schedule 40 Pipe Dies, Tool Table Pusher and Punch Pusher
  • Channel Shear Package: Channel Shear - 2" to 6" Adjustable, 5" Maximum and Offset Die Holder
  • Manual Productivity Package: 24"W x 5'L Infeed Conveyor with Support Arms, Laser Light for Bar Shear, Work Light, Punch Table Extension, Tool Table Extension and 48" Deluxe Back Gauge
  • Electric Productivity Package: 24"W x 5'L Infeed Conveyor with Support Arms, Laser Light for Bar Shear, Work Light, Punch Table Extension, Tool Table Extension and 48" Electric Back Gauge
This website uses cookies to ensure you get the best experience on our website. This use may include analytics, personalization and ads. Learn More