Menu
Your Cart

DOALL 290212 2012-VH 20" X 12" VERTICAL CONTOUR BAND SAW WITH 12" WORK HEIGHT

DOALL 290212 2012-VH 20" X 12" VERTICAL CONTOUR BAND SAW WITH 12" WORK HEIGHT
DOALL 290212 2012-VH 20" X 12" VERTICAL CONTOUR BAND SAW WITH 12" WORK HEIGHT
$28,835.00
  • Stock: In Stock
  • Model: 2012-VH
  • Weight: 1,650.00lb
  • Dimensions:
  • 54.00in x 54.00in x 82.00in
  • SKU: 290212
  • Upright, variable hydraulic controlled, metal cutting band saw is among the most versatile sawing machine on the market today
  • This contour metal cutting band saw can cut aluminum, brass, copper, mild steel, tough tool steel, stainless steel and sheet metal, as well as non-metals like plastics and fibrous materials
  • It is widely used in machine shops, maintenance departments, schools and other areas where cutting a wide variety of materials is required
  • It offers a wide variety of available accessories that have been engineered to provide versatility and productivity, provides close tolerance machining and reliable operation
  • Arc-welded steel unitized frame
  • Variable frequency AC drive which provides variable band speeds, soft start and dynamic brake functions
  • Hydraulically powered work table with 12" table stroke
  • Job selector
  • Band speed indicator
  • Flanged wheels with steel backed rubber tires
  • Wheel brush assembly
  • Band tension indicator
  • Post elevating hand wheel
  • Dual range transmission
  • Chip pan
  • Mist coolant system uses plant air
  • Hydraulic reservoir
  • Conforming to meet standards of NEC, including N.E.M.A. 12 enclosure with door-interlocked fusible disconnect switch, containing control transformer with line voltage primary, 120V fused secondary, magnetic starter for drive motor, terminal strips and hardware, push button station with oil tight push buttons and selector switch
Cutting Capacity at 90°:
Round (Diameter/In. | mm)
Rectangle (H x W/In. | mm)

12 | 305
20 x 12 | 510 x 305
Throat Depth - Band to Column (Max./In. | mm) 20.05 | 509.5
Work Height Capacity (Max./In. | mm) 12.12 | 308.1
Blade Drive Variable Frequency AC
Blade Speeds (SFPM | MPM) Low Range: 30 - 320 | 9 - 100
High Range: 550 - 5,500 | 168 - 1,680
Table Size (L x W/In. | mm) 26.57 x 33.46 | 675 x 850
Table Tilts (Left | Right) 10° | 45°
Table Stroke (In. | mm) 12 | 305
Table Feed (SFPM | MPM) 0 - 6 | 0 - 1.8
Table Feed Force (Lbs. | Kg) 0 - 175 | 0 - 79
Table Load Capacity (Lbs. | Kg) 500 | 227
Material Pass Line Height (In. | mm) 40.29 | 1023.4
Table T-Slots Number | Size (Number/In. | mm) 2 | 1/2 | 13
Blade Width (Min. - Max./In. | mm) 1/16 - 1 | 1.5 - 25.4
Blade Length (In. | mm) 154.01 | 3,912
Band Wheels Diameter (In. | mm) 20.07 | 510
Upper Wheel Adjustment (In. | mm) 3 | 76
Balde Guides - Standard Tool Steel
Blade Guides - Optional Carbide
Main Motor (HP | kW) 3 | 2.23,
208V/230V/460V/3 Phase/60 Hz.,
Please Specify
Hydraulic Pump Motor (HP | kW) 1-1/2 | 1.12
Hydraulic Tank Capacity (Gallons | Liters) 3 | 11.4
Floor Space Dimensions Required (W x L x H/In. | mm) 48.03 x 53.83 x 81.42 | 1,220 x 1,367.3 x 2,068.1
Net Weight (Lbs. | Kg) 1,649.06 | 748
Design and specifications are subject to change without notice.
  • One 1/2"W x .035" THK x 154"L x 6 TPI Bi-Metal Saw Blade
  • One Set of Saw Guide Blocks with Carbide Backup for 1/8" to 1" | 3 mm to 25 mm Bands
  • One Set of Metal Saw Guide Inserts for 1/4" | 6 mm, 3/8" | 9 mm and 1/2" | 13 mm Bands
  • One Set of 3/4" | 19 mm and 1" | 25 mm Carbide Faced Inserts
  • Variable Frequency AC Drive
  • Job Selector
  • Band Speed Indicator
  • Wheel Brush Assembly
  • Band Tension Indicator
  • Post Elevating Hand Wheel
  • Dual Range Transmission
  • Chip Pan
  • Mist Coolant System
  • Wrench for Saw Guides
  • Table Trunnion Wrench
  • Transmission Oil
  • Complimentary Coolant Package
  • Instruction and Parts Manuals on CD or USB Data Stick
  • Voltage Wiring for 575V/3 Phase/60 Hz.
  • Extended Traverse Work Table - 1,100 Lb. Capacity, (4) 2" T-Slots, 34"L x 42"W | 860 mm L x 1070 mm W Table Area, Reduces Work Height by 4" Approximately
  • Extended Work Heights - 6", 12" and 18"
  • DBW-15 Welder with Grinder and Blade Shear - Column Mounted 240 Volt or Below
  • DBW-15 Welder with Grinder and Blade Shear - Column Mounted Above 240 Volt
  • Work Holding Jaw with Handles
  • Magnifying Attachment - Attaches to Work Light, Not Available on CE Models
  • Disk Cutting Attachment - 2-1/2" - 30" | 65 mm - 760 mm Diameter Capacity
  • Extended 18" Hydraulic Table Stroke Assembly
  • International Escutcheons - Matric Dials and Indicators
  • V5 Drive - Eliminates Standard Drive Motor and Transmission - 5 HP Drive Motor with Spindle Assembly Is Installed - Speed Range Changes to 550 - 5,500 SFPM | 168 - 1,675 MPM - Factory New Machine Installed Only
  • Heavy Duty High Speed Saw Guide Blocks with Carbide Backup for 1/16" - 1" | 1.5 mm - 27 mm Bands, Speeds to 6,000 FPM | 1,830 MPM Less Inserts Per Pair - Equipped with Flanged Wheels
  • Set of 4 Hardened Tool Steel Reversible Saw Guide Inserts for Any Single Band Width - 1/8" | 3 mm, 3/16" | 5 mm, 1/4" | 6 mm, 3/8" | 10 mm, 1/2" | 13 mm, 5/8" | 16 mm, 3/4" | 19 mm, 1" | 27 mm
  • Set of 4 Tungsten Carbide Single Faced Saw Guide Inserts for Any Single Band Width - 1/4" | 6 mm, 3/8" | 10 mm, 1/2" | 13 mm, 5/8" | 16 mm, 3/4" | 19 mm, 1" | 27 mm
  • Type ll High Speed Roller Saw Guide Blocks Less Rollers Per Pair - Reduces Work Height 1" | 27 mm and Restricts Table Tilt to 27°
  • Rollers, Set of 4 for 1" | 27 mm Saw Band Width
  • Mist Lubricator
  • Rip Fence
  • Protractor Work Stop
  • Chip Blower
  • Work Light
  • Flood Coolant System
  • Magnetic Wand Chip Remover
  • Start-up Kit - 6 Saw Blades, Vernier Caliper, Heavy-duty Work Gloves, Work Apron, Safety Glasses, Squeegee, Magnetic Wand Chip Remover and Ball Cap
This website uses cookies to ensure you get the best experience on our website. This use may include analytics, personalization and ads. Learn More