Menu
Your Cart

ATEK BANTAM B424 24 TON X 4' PNEUMATIC PRESS BRAKE

ATEK BANTAM B424 24 TON X 4' PNEUMATIC PRESS BRAKE
ATEK BANTAM B424 24 TON X 4' PNEUMATIC PRESS BRAKE
$17,605.00
  • Stock: In Stock
  • Model: B424
  • Weight: 2,835.00lb
  • Dimensions:
  • 60.00in x 36.00in x 61.00in
  • SKU: B424
  • Made in the U.S.A.
  • This pneumatic press brake is designed and built with quality and attention to details, offers versatility and economy. It performs numerous prototyping and production press brake functions including bending, flanging, hemming, flattening, staking, box forming and more
  • Positive ram stop - Adjustable stroke depth control is provided by the screw stop for precise repeatability. Raise the adjustable bed and shorten the ram stroke to maximize productivity while reducing air consumption and minimizing the pinch point for safer operation
  • Accommodate a wide variety of tooling - Adjustable die space handles numerous tool sets and reduces or eliminates the pinch point. Per OSHA guidelines, a die space gap of 1/4" or less is not a pinch point and provides the safest operation method. Loosen the bed and raise or lower it with the large bed elevating screws. Leveling of bed to ram is easily accomplished using this feature
  • Select the optimal speed - Ram speed control via an infinitely variable valve allows instant adjustment of air flow to the dual cylinders. A minimum setting creates a creep mode for setup, or select any other position to safely match ram speed with your job
  • Give the operator full command - Safety hooded foot pedal controls all ram motion. Fully depress control pedal for down stroke. Slightly release pedal to stop advancing the ram. Completely release pedal at any time and the counter-balanced ram automatically retracts to the top of the stroke. For added safety, the ram retracts if air supply is removed
  • Condition the air supply - Modular FRL unit is standard to condition air supply to pneumatic components for long life. The unit consists of an adjustable filter/regulator module with pressure gauge, adjustable flow lubricator module and a three-way lockable shut-off valve. The valve is vented to relieve downstream pressure in the off position per OSHA guidelines. Keyed padlock and lockout tag are included
  • Select the right tonnage for the job - Variable tonnage control provided through the modular filter/regulator/lubricator unit delivers twelve tons of ram force to form up to 3/8" at maximum pressure. Lower the pressure to suit the job, reduce air consumption and preserve tooling
  • Run without interruption - Requires minimal service. Designed for simplicity, there are few moving parts to wear out - no motor, clutch or brake to maintain or replace
  • Heavy duty ram gib brackets are formed, not welded. They are simple to adjust and provide years of service
  • All critical pivot points are heat treated and equipped with grease fittings. Special bushing material is engineered for high loads to support the rocking lever pivot shaft
  • Runs on compressed air, so it goes anywhere - No need to worry about 3-phase power or running new electrical lines. Installation is simple. It just needs an air line. 90 PSI gives rated tonnage, but it operates anywhere from 10 to 110 PSI. Includes quite, long-life, steel-reinforced cylinder bumpers
  • Optional with Y-axis bend angle control
    - Mechanical digital readout (MDRO) to control the ram stroke
  • Optional with Pro-Gage® micrometer front or back gauge
    - The universal system can retrofit to any brake for higher productivity. Typically mounted behind the bed, the system can also be front mounted. The system is a proven timesaver when full CNC is not
      justifiable. Attach direct mounting rail to the bed for easy left to right positioning, specify length when ordering. With 25" total of X axis travel, 9" of vertical adjustment, and 180° of rotary tube motion, these
      units handle a broad matrix of applications. Includes flip fingers, horizontal adapter blocks and protractor scales
    - Precision adjustment dial with brass pointer, revolving handle and knurled locking ring. 0.001" Graduations and 0.050" per dial revolution
    - The heavy-duty adapter block solidly accommodates fingers or specials for develop
    - Offers the rigidity of the direct mount rail available in lengths of 3', 4', 6' and 8'
    - Maximum back gauge depth is reduced by 2" when equipped with micro-adjustable gauge
  • Optional with Smart-Gage™ CNC back gauge
    - It is very user-friendly requiring minimal operator training. Simply select "Edit" mode, move the cursor to the desired line, key in new or over existing data, select "Single" or "Auto" and go! In the
      "Auto" mode when the ram retracts to the top, the gauge moves to the next position automatically, or if entered, to the rear to ease part loading or repositioning for the duration of the retract delay
    - An Acu-Rite® linear encoder detects position directly at the gauge bar ensuring positional accuracy regardless of servomechanism errors. Other manufacturers use a rotary encoder mounted on the
      motor. This method only measures armature position. Any system backlash is not detected resulting in positional errors and poor repeatability
    - Two rugged, flip finger assemblies with quick clamps, makes setups easy and fast without tools. Strong enough to handle the abuse of heavy material forming. High visibility scales aid positioning
    - Gauge frames mount to the press brake side frames for stable operation. The rear of the side frames, not the bed, is the best location for repeatable performance in a precision gauging system. Utilizes
      existing hole patterns in the housings for simple and fast in-field installation. Installation can be performed in less than two hours
    - Specify inch or metric unit and input power voltage when ordering
  • Optional with two hand safety control
    - This control keeps the operator's hands away from the point of operation without sacrificing complete foot pedal control. Both pushbuttons must be pressed and held for air to flow to the foot pedal.
      Includes the front workpiece support table
  • Optional with segmented, safety clamp ram
    - It holds safety or hook-tongue tooling while the clamp action design easily holds short tool segments. The flip lever, spring-loaded ram clamps are 5-1/2" long and mount on 6" centers. Safety or 
      hook-tongue tooling hooks into the clamps. When the clamps are loosened, the tooling cannot drop out of the ram thus eliminating a safety hazard and/or preventing tooling damage. Using safety tongue
      tooling is particularly important when using long or tall tooling that is very heavy
  • Optional with safe, wide-base floor stand
    - It is unique to the unit and is predrilled to accept the bolt hole mounting pattern. It is fully welded, reinforced and equipped with mounting feet to accommodate floor anchors or vibration mounting pads
  • Optional with front workpiece support table
    - It is vertically adjustable and conveniently supports a supply of small workpieces to be bent. Measurement left to right is equal to the bed width and is 12" deep. The vertical adjustment allows its top
      surface to be level with the tops of most bottom dies. This welded and reinforced support can also be used for clamping angle stops or other front positioning devices
  • Optional with additional tooling space side frames
    - Increase tooling space by using taller side frames. Use with commercially available tool clamping systems, box forming punches or to accommodate the special, extra-tall tooling. Standard ram stroke
      applies for the unit. Standard tooling can be used, but may require a ram spacer to take up the extra space
  • Atek Bantam® press brake tooling is standard American-style, steel press brake tooling for use in all press brakes. Just as Atek’s press brakes fill the small-machine void left by the large press brake manufacturers, this press brake tooling meets the need of many small part and work cell manufacturers. The press brake tooling is available on short, cut-to-length tooling at a reasonable price. Other tool styles, tool modification and machining, and special tools are also available
  • Photo shown model B624 with optional 6' Floor Stand
    CAUTION: Always wear eye, face, arm, leg and body gear protection when using this or any other press brake
Tonnage Capacity at Mild Stroke (Ton | PSI)
24 | 90
Tooling Space (In.) 9-1/2
Ram Stroke (In.) 0 - 2
Bed Adjustment Up (In.) 0 - 3
Throat Depth (In.) 6
Shut Height (In.) 8-3/4
Bed and Ram Thick (In.) 1-3/4
Ram Height (In.) 13
Bed Width (In.) 48
Between Housings (In.) 48-1/4
Back Gauge Depth (In.)
- Between Housings
- Between Cylinders

0 - 19
21
Full Stroke Free Air (CFS)
4.4
Maximum Speed at Full Stroke (SPM) 20
Overall Dimensions (L x W x H/In.)
60 x 36 x 61
Shipping Weight (Lbs.)
2,835
Smart-Gage™ CNC Back Gauge Specifications


Display Control
4 Lines - Job No. | Bend No. | Dimension | Seconds of Delay,
5 Characters|Line,
Backlit LED 
Data Entry Via Keypad (Key) 16
Resolution (In.) .001
Parts Program Storage Capacity (Parts)
99
Maximum Bends Per Part (Bends)
9
Retract Delay (Seconds)0 - 9
Memory Non Volatile Internal Battery Back-Up
X-Axis Travel from Bend Line (In.) 0 - 12
Vertical Finger Adjustment (In.) 2
Left to Right Finger Adjustment - Bed Width Less (In.) 5
Maximum Speed (IPM) 500
Accuracy (In.)± .002
Repeatability (In.)
± .002
Braking Load (Lb.)
400
Electrical Input Power 110V/1 Phase/60 Hz.
Electrical Input Power 220V/1 Phase/50 Hz.
Electrical Fuse Size (AMP) 2
Electrical Control Voltage (VAC) 24
Design and specifications are subject to change without notice.
  • 4150 Tool Steel Die Set, Consisting of A 90° Top Punch and 3/4" Bottom Vee Die in A 4' Length
  • Removable Die Holder, Accepts American Style Tooling
  • Complete Modular FRL Unit with OSHA Lockout
  • Safety Hooded Foot Pedal with Toe Flip Cover
  • Tamper-Proof Speed Control Valve
  • Quick Exhaust with Muffler
  • Manual Back Gauge with Screw-Adjustable Finger Stops
  • Y-Axis Mechanical Digital Readout (MDRO) Ram Stroke Control
  • Pro-Gage® Micrometer Back Gauge, Two Units
  • Pro-Gage® Micrometer Front Gauge, One Unit
  • 3' Long Direct Mount Rail for Pro-Gage® Gauge
  • 4' Long Direct Mount Rail for Pro-Gage® Gauge
  • 6' Long Direct Mount Rail for Pro-Gage® Gauge
  • 8' Long Direct Mount Rail for Pro-Gage® Gauge
  • Smart-Gage™ CNC Back Gauge
  • 4' Two Hand Safety Control with Front Workpiece Support Table
  • 4' Front Workpiece Support Table
  • 4' Segmented, Safety Clamp Ram
  • 2" Additional Tooling Space Side Frames without Top Punch
  • 4" Additional Tooling Space Side Frames without Top Punch
  • 6" Additional Tooling Space Side Frames without Top Punch
  • Tooling Packages for Punches and Dies
  • 4' Floor Stand
This website uses cookies to ensure you get the best experience on our website. This use may include analytics, personalization and ads. Learn More