Menu
Your Cart

SHARP 24160V 24" X 160" EXTRA HEAVY DUTY GEARED HEAD ENGINE LATHE

SHARP 24160V 24" X 160" EXTRA HEAVY DUTY GEARED HEAD ENGINE LATHE
SHARP 24160V 24" X 160" EXTRA HEAVY DUTY GEARED HEAD ENGINE LATHE
$90,465.00
  • Stock: In Stock
  • Model: 24160V
  • Weight: 10,780.00lb
  • Dimensions:
  • 195.00in x 53.00in x 63.00in
  • SKU: 24160V
  • Headstock with clutch allows the motor to continue to run while the spindle is switched from forward to reverse
  • Hardened and ground alloy steel spindle supported by two TIMKEN® high precision tapered roller bearings and one high precision ball bearing to ensure accuracy and stability
  • The unparalleled spindle design headstock uses special adjustable blocks can guarantee vibration free turning even irregular material on high speeds
  • Nickel-Chrome alloy steel headstock gears are hardened and ground
  • Headstock is equipped with lubrication system for gears and shafts, providing smooth and quite operation
  • 4-1/8" Spindle bore for large workpiece
  • Removable gap for large diameter applications
  • Heavy duty D1-11 camlock spindle nose
  • One-piece Meehanite® castings base for uniform construction and durability
  • Induction hardened and ground bedways for rigid structure
  • 19" Wide bedway
  • Totally enclosed oil bathed gearbox design use levers to set different threads and feeds
  • Inch and metric dual dials with direct readings for cross and compound feeds
  • Wide range of feeds and threads is conveniently located on the chart for inch and metric near the selector levers
  • The special pin locks lever into position on gear shifting levers to prevent the handle out of place accidentally or being shifted during heavy cuttings
  • Directional control of carriage feed lever at side of apron for easy operations
  • 4-Way rapid traverse movement
  • Fully adjustable tapered gibs on cross slides provide wear compensation and long life
  • 30-1/4"W x 26-3/4"L Large carriage
  • Centralized push button controls with emergency stop and spindle jog
  • 4:1 Reduction ratio dual speed tailstock has tang slot and inch/metric graduations on the quill
  • Electro-Dynamic activated foot brake for quick stopping action
  • Complete coolant system equipped
  • Dual voltage electrics for 220V/440V/3 Phase/60 Hz., specify when ordering
  • Photo shown model 2480V Lathe
Swing Over Bed (In.)
24
Swing Over Cross Slide (In.) 14-3/4
Swing Over Gap (In.) 33
Distance Between Centers (In.) 160
Width of Bed (In.) 19
Height of Bed (In.)15-3/4
Cross Slide Travel (In.) 14-3/4
Compound Slide Travel (In.)
9
Spindle Through Hole Diameter (In.) 4-1/8
Spindle Nose - Camlock
D1-11
Spindle Bore Taper (w/Sleeve)
MT-7 (MT-5)
Number of Spindle Speeds
18
Range of Spindle Speeds (RPM)
10 - 1,200
Range of Longitudinal Feeds (IPR) .0015 - .2
Range of Cross Feeds (IPR)
.0006 - .16
Number of Inch Threads
60
Range of Inch Threads (TPI)
1/4 - 84
Number of Metric Threads
60
Range of Metric Threads (mm)
.2 - 112
Number of Diametral Pitch Threads
55
Range of Diametral Pitch Threads (DP) 1 - 240
Number of Modular Threads
55
Range of Modular Threads (MP)
.05 - 28
Leadscrew Diameter (In.) 1-1/2
Leadscrew Thread Pitch (TPI) 2
Tailstock Quill Travel (In.) 7-1/2
Tailstock Quill Diameter (In.) 3-1/8
Tailstock Quill Taper MT-5


Main Motor (HP)

15,
220V/440V/3 Phase/60 Hz.,
Prewired 220V
Motor Transformer Installed - Optional 380V or 575V/3 Phase
Power Consumptions (Volts | kVA | Amps)220 | 15 | 40
Power Consumptions (Volts | kVA | Amps)
440 | 15 | 20
Machine Dimensions (L x W x H/In.)
195 x 53 x 63
Net Weight (Lbs.) 10,780
Design and specifications are subject to change without notice.
  • Steady Rest with Roller Jaws - 8.75" - 13" Capacity
  • 20" Face Plate
  • 4-Way Tool Post
  • 4-Way Rapid Traverse
  • Longitudinal Carriage Stop
  • Thread Chasing Dial
  • Halogen Work Light
  • Foot Brake
  • Complete Coolant System
  • Toolbox with Tools
  • 380V or 575V/3 Phase/60 Hz. Transformer
  • 20 HP Motor Upgrade - Factory Installed
  • BISON 12" 3-Jaw Self-Centering Scroll Chuck with 2-Sets Hard Solid Jaws
  • BISON 16" 3-Jaw Self-Centering Scroll Chuck with 2-Sets Hard Solid Jaws
  • BISON 20" 3-Jaw Self-Centering Scroll Chuck with 2-Sets Hard Solid Jaws
  • BISON 12" 3-Jaw Self-Centering Scroll Chuck with 2-Piece Reversible Jaws
  • BISON 16" 3-Jaw Self-Centering Scroll Chuck with 2-Piece Reversible Jaws
  • BISON 20" 3-Jaw Self-Centering Scroll Chuck with 2-Piece Reversible Jaws
  • BISON 12" 4-Jaw Independent Chuck with 2-Sets Hard Solid Jaws
  • BISON 16" 4-Jaw Independent Chuck with 2-Sets Hard Solid Jaws
  • BISON 20" 4-Jaw Independent Chuck with 2-Sets Hard Solid Jaws
  • BISON 12" 4-Jaw Independent Chuck with 2-Piece Reversible Jaws
  • BISON 16" 4-Jaw Independent Chuck with 2-Piece Reversible Jaws
  • BISON 20" 4-Jaw Independent Chuck with 2-Piece Reversible Jaws
  • BISON 16" 4-Jaw Self-Centering Scroll Chuck with 2-Sets Hard Solid Jaws
  • BISON 20" 4-Jaw Self-Centering Scroll Chuck with 2-Sets Hard Solid Jaws
  • BISON 16" 4-Jaw Self-Centering Scroll Chuck with 2-Piece Reversible Jaws
  • BISON 20" 4-Jaw Self-Centering Scroll Chuck with 2-Piece Reversible Jaws
  • ACU-RITE 2-Axis Digital Readout System Lathe Package with Installation
  • FAGOR 2-Axis Digital Readout System Lathe Package with Installation
  • NEWALL 2-Axis Digital Readout System Lathe Package with Installation
  • ALORIS Quick Change Tool Post with 4 Holders
  • ATLAS 5C Front Mount Hand Wheel Collet Chuck
  • JFK 5C Lever Type Collet Closer with Installation
  • LYNDEX 5C Round Collet Set, 16 Pc/Set, 1/8" - 1-1/16" x 1/16"
  • JACOBS Ball Bearing Drill Chuck and Arbor
  • Steady Rest with Brass Jaws, 11" - 17" Capacity
  • Steady Rest with Brass Jaws, 14" - 21" Capacity
  • Roller Jaws for Steady Rest, 3 Pc/Set
  • Follow Rest
  • Micrometer Carriage Stop
  • Taper Turning Attachment - Factory Installed
  • Live Center, MT-5
  • Spindle End Safety Cover - Factory Installed
  • Tool Post Guard with Limited Switch - Factory Installed
  • Chuck Guard with Limited Switch - Factory Installed
  • Accordion Type Leadscrew Cover - Factory Installed
  • Full Coverage Type Leadscrew Cover - Factory Installed
  • Rear Splash Guard
  • Full Length Splash Guard - Factory Installed
  • UL Rated Electrical Parts & Motor
  • CSA Rated Electrical Parts & Motor
This website uses cookies to ensure you get the best experience on our website. This use may include analytics, personalization and ads. Learn More