Menu
Your Cart

SHARP 26100B 26" X 100" HEAVY DUTY GEARED HEAD ENGINE LATHE

SHARP 26100B 26" X 100" HEAVY DUTY GEARED HEAD ENGINE LATHE
SHARP 26100B 26" X 100" HEAVY DUTY GEARED HEAD ENGINE LATHE
$55,300.00
  • Stock: In Stock
  • Model: 26100B
  • Weight: 7,430.00lb
  • Dimensions:
  • 157.00in x 41.00in x 52.00in
  • SKU: 26100B
  • Hardened and ground alloy steel spindle supported by two high precision tapered roller bearings and one high precision ball bearing to ensure accuracy and stability
  • The unparalleled spindle design headstock uses special adjustable blocks can guarantee vibration free turning even irregular material on high speeds
  • Hardened and ground headstock gears and shafts are lubricated in oil bath
  • 4.5" Spindle bore for large workpiece
  • Removable gap for large diameter applications
  • Heavy duty D1-11 camlock spindle nose
  • Induction hardened and ground bedways for rigid structure
  • One-piece Meehanite® castings base for uniform construction and durability
  • The special pin locks lever into position on gear shifting levers to prevent the handle out of place accidentally or being shifted during heavy cuttings
  • Totally enclosed oil bathed gearbox design use levers to set different threads and feeds
  • Inch and metric dual dials with direct readings for cross and compound feeds
  • Thread and feed chart for inch and metric
  • Directional control of carriage feed lever at side of apron for easy operations
  • Centralized push button controls with emergency stop and spindle jog
  • Tailstock has tang slot and inch/metric graduations on the quill
  • Electrically activated foot brake for quick stopping action
  • Complete coolant system equipped
  • Standard with full length splash guard
  • Dual voltage electrics for 220V/440V/3 Phase/60 Hz., specify when ordering
Swing Over Bed (In.)
26
Swing Over Cross Slide (In.) 17.24
Swing Over Gap (In.) 35
Center Height (In.) 13
Distance Between Centers (In.) 100
Length of Bed (In.) 130.5
Width of Bed (In.) 15-3/4
Cross Slide Travel (In.) 14-3/4
Compound Slide Travel (In.) 8
Width of Compound (In.)
6
Spindle Through Hole Diameter (In.)
4.5
Spindle Nose - Camlock
D1-11
Spindle Bore Taper (w/Sleeve)
MT-7 (MT-5)
Number of Spindle Speeds
12
Range of Spindle Speeds (RPM)
10 - 1,000
Number of Longitudinal Feeds
18
Range of Longitudinal Feeds (IPR)
.0022 - .032
Number of Cross Feeds
17
Range of Cross Feeds (IPR)
.00026 - .035
Number of Inch Threads 44
Range of Inch Threads (TPI) 2 - 56
Number of Metric Threads
24
Range of Metric Threads (mm)
.5 - 14
Leadscrew Diameter (In.) 1-1/2
Leadscrew Thread Pitch (TPI) 4
Tailstock Quill Travel (In.) 6-1/2
Tailstock Quill Diameter (In.) 3
Tailstock Quill Taper MT-5


Main Motor (HP)

15,
220V/440V/3 Phase/60 Hz.,
Prewired 220V
Motor Transformer Installed - Optional 380V or 575V/3 Phase
Power Consumptions (Volts | kVA | Amps)220 | 16 | 45
Power Consumptions (Volts | kVA | Amps)
440 | 16 | 22.5
Machine Dimensions (L x W x H/In.)
157 x 41 x 52
Net Weight (Lbs.) 7,430
Design and specifications are subject to change without notice.
  • QU 16" 4-Jaw Independent Chuck with 2-Sets Hard Solid Jaws
  • Steady Rest with Brass Jaws - 3.2" - 10.6" Capacity
  • Follow Rest - .79" - 3.94" Capacity
  • 20" Face Plate
  • 4-Way Tool Post
  • 4-Way Carriage Stop
  • Thread Chasing Dial
  • 16" Chuck Guard
  • Longitudinal Rapid Traverse
  • Halogen Work Light
  • Foot Brake
  • Complete Coolant System
  • Full Length Splash Guard
  • Toolbox with Tools
  • 380V or 575V/3 Phase/60 Hz. Transformer
  • BISON 12" 3-Jaw Self-Centering Scroll Chuck with 2-Sets Hard Solid Jaws
  • BISON 16" 3-Jaw Self-Centering Scroll Chuck with 2-Sets Hard Solid Jaws
  • BISON 12" 3-Jaw Self-Centering Scroll Chuck with 2-Piece Reversible Jaws
  • BISON 16" 3-Jaw Self-Centering Scroll Chuck with 2-Piece Reversible Jaws
  • BISON 12" 4-Jaw Independent Chuck with 2-Sets Hard Solid Jaws
  • BISON 16" 4-Jaw Independent Chuck with 2-Sets Hard Solid Jaws
  • BISON 12" 4-Jaw Independent Chuck with 2-Piece Reversible Jaws
  • BISON 16" 4-Jaw Independent Chuck with 2-Piece Reversible Jaws
  • BISON 16" 4-Jaw Self-Centering Scroll Chuck with 2-Sets Hard Solid Jaws
  • BISON 16" 4-Jaw Self-Centering Scroll Chuck with 2-Piece Reversible Jaws
  • ACU-RITE 2-Axis Digital Readout System Lathe Package with Installation
  • FAGOR 2-Axis Digital Readout System Lathe Package with Installation 
  • NEWALL 2-Axis Digital Readout System Lathe Package with Installation
  • ALORIS Quick Change Tool Post with 4 Holders
  • ATLAS 5C Front Mount Hand Wheel Collet Chuck
  • JFK 5C Lever Type Collet Closer with Installation
  • LYNDEX 5C Round Collet Set, 16 Pc/Set, 1/8" - 1-1/16" x 1/16"
  • JACOBS Ball Bearing Drill Chuck and Arbor
  • Steady Rest with Brass Jaws, 6.7" - 15.2" Capacity
  • Roller Jaws for Steady Rest, 3 Pc/Set
  • Micrometer Carriage Stop
  • Taper Turning Attachment with Installation
  • Live Center, MT-5
  • Spindle End Safety Cover - Factory Installed
  • Tool Guard with Limited Switch - Factory Installed
  • Chuck Guard with Limited Switch - Factory Installed
  • Leadscrew Guard - Factory Installed
  • UL Rated Electrical Parts & Motor
  • CSA Rated Electrical Parts & Motor
This website uses cookies to ensure you get the best experience on our website. This use may include analytics, personalization and ads. Learn More