Menu
Your Cart

KINGSTON HD-2260 22" X 60" HIGH SPEED PRECISION GAP BED ENGINE LATHE

KINGSTON HD-2260 22" X 60" HIGH SPEED PRECISION GAP BED ENGINE LATHE
KINGSTON HD-2260 22" X 60" HIGH SPEED PRECISION GAP BED ENGINE LATHE
$28,900.00
  • Stock: In Stock
  • Model: HD-2260
  • Weight: 5,300.00lb
  • Dimensions:
  • 120.00in x 50.00in x 50.00in
  • SKU: HD-2260
  • ISO 9001 Certified manufacturer
  • Headstock is made of high tensile cast iron provides rigidity and durability
  • Spindle is made of medium carbon steel (S45C), hardened by high frequency heat treatment and then precisely ground
  • Three P grade taper roller bearings supported spindle to assure accuracy and rigidity
  • Headstock gears are made of chromium molybdenum steel (SCM-21), treated by cementation then precisely ground to provide smooth and quite running
  • Pump forced lubrication system for headstock to ensure accuracy and operation life
  • Bed is made of Meehanite® castings and bedways are hardened and precision ground, Rockwell® HRC52 hardness
  • Removable gap for large diameter workpiece cuttings
  • Comprehensive range of inch and metric threads
  • Oil bathed gear box gears are made of SCM-4 steel and hardened, all gears are running quietly
  • Output shaft with safety pin to protect gear box from damage
  • Hardened and precision ground cross slide ways to prolong operation life
  • Oil bathed and hardened cross slide screw is equipped with backlash adjustment feed nut to maintain accuracy
  • Tool post designed with adjustable taper fit and equipped with thrust bearing to provide lasting accuracy and easy lock
  • Manual and automatic lubrication system is equipped on apron, will keep cross slide ways and bedways clean and lubricated to assure durability and accuracy
  • Apron is equipped with an overload protection device to avoid machine damage
  • Hardened and ground large tailstock quill has 1:1 and 1:1/4 changeable feeds with inch and metric scale graduated
  • All controls within easy reach
  • Starting lever with safety device
  • Emergency foot operated braking system
Swing Over Bed (In.) 22
Swing Over Cross Slide (In.)13
Swing in Gap (In.) 31.3
Distance Between Centers (In.) 60
Width of Bed (In.)15.7
Gap Width in Front of Face Plate (In.) 10.6
Height of Center from Leg Bottom (In.) 42
Spindle Through Bore (In.) 4-1/16
Taper of Spindle Bore and Center MT-7 | MT-5
Type of Spindle Nose D1-8
Number of Spindle Speeds 12
Range of Spindle Speed (RPM) 13 - 1,200
Number of Feed Changes 16
Range of Feeds per Revolution - Longitudinal (In.) .0012 - .039
Range of Feeds per Revolution - Cross (In.) .0004 - .0117
Diameter and Pitch of Leadscrew (Diameter | TPI)
1.77 | 4
Number of Inch Threads
44
Range of Inch Thread (TPI) 2 - 72
Number of Metric Threads 39
Range of Metric Thread (mm)
.2 - 14
Maximum Travel of Compound (In.) 9.5
Maximum Travel of Cross Slide (In.) 15.8
Tailstock Quill Travel (In.) 9.8
Tailstock Quill Diameter (In.) 2.9
Taper in Tailstock Quill MT-5
Main Drive Motor (HP | KW)
10 | 7.457
230V/460V/3 Phase/60 Hz.,
Prewired 230V
Coolant Pump Motor (HP | W)
1/8 | 93.21
Machine Assembled Dimensions (L x W x H/In.) 114 x 50 x 50
Machine Floor Space Dimensions (L x W x H/In.) 120 x 50 x 50
Machine Weight (Lbs.) 5,300
Design and specifications are subject to change without notice.
  • 1.6" - 10" Capacity Steady Rest with Roller Jaws
  • 12" Back Plate
  • MT-7 to MT-5 Headstock Spindle Center Adaptor
  • Chuck Guard
  • 4-Way Tool Post
  • Automatic Longitudinal Feed Stop Bar
  • Thread Chasing Dial
  • LED Work Light
  • Two-Speed Drive Tailstock Spindle
  • Foot Brake System
  • Coolant System with Pump and Piping
  • Pull Drawer Chip Pan
  • Full Length Splash Guard
  • Tool Box with Tools
  • 12" 3-Jaw Scroll Chuck
  • 16" 3-Jaw Scroll Chuck
  • 16" 4-Jaw Independent Chuck
  • 7.5" - 15" Capacity Steady Rest with Roller Jaws
  • 7" Follow Rest
  • 20" Face Plate
  • Turret Carriage Stop
  • Micrometer Carriage Stop
  • Limit Switch for Chuck Guard
  • Longitudinal Rapid Traverse with Installation
  • Telescopic Taper Turning Attachment with Installation
  • 5C Round Collet Set
  • JFK 5C Lever Type Collet Closer with Installation
  • ALORIS Quick Change Tool Post and Holders Set
  • NEWALL 2-Axis Digital Readout System Lathe Package with Installation
This website uses cookies to ensure you get the best experience on our website. This use may include analytics, personalization and ads. Learn More