Menu
Your Cart

BAILEIGH 1008136 VM-1054-3 10" X 54" ELECTRONIC VARIABLE SPEED VERTICAL MILLING MACHINE WITH MITUTOYO 2-AXIS DRO AND X, Y & Z-AXIS POWER FEEDS & POWER DRAW BAR

BAILEIGH 1008136 VM-1054-3 10" X 54" ELECTRONIC VARIABLE SPEED VERTICAL MILLING MACHINE WITH MITUTOYO 2-AXIS DRO AND X, Y & Z-AXIS POWER FEEDS & POWER DRAW BAR
BAILEIGH 1008136 VM-1054-3 10" X 54" ELECTRONIC VARIABLE SPEED VERTICAL MILLING MACHINE WITH MITUTOYO 2-AXIS DRO AND X, Y & Z-AXIS POWER FEEDS & POWER DRAW BAR
$28,759.00
  • Stock: In Stock
  • Model: VM-1054-3
  • Weight: 3,007.10lb
  • Dimensions:
  • 60.00in x 60.00in x 87.00in
  • SKU: 1008136
  • This vertical milling machine has a 10" x 54" table that has been hardened, ground, polished, and coated with Turcite® B to extend life and help eliminate corrosion
  • This vertical milling machine is a fully variable speed through the use of a YASKAWA® inverter drive
  • Adjustable spindle speeds from 80 to 3,800 RPM, by selecting the right speed tooling life is lengthened and cut quality improves, both of which save money
  • MITUTOYO® 2-Axis digital readout system for positioning down to 1/10 of a thousandth of an inch
  • Powerful 3 HP | 2.23 kW motor that runs on 220V/3 Phase/60 Hz. electric power
  • The spindle has specified a NMTB-40 spindle taper. This type spindle is stronger and give the operator a choice of larger tooling should the need arise
  • Spindle head can swivel 90° right or left and 45° front or rear, the ram can revolve horizontally by an angle of 180°
  • 3 Position - Forward | Stop | Reverse, switch to control rotation of spindle
  • Micro feed spindle headwheel, when engaged, this manual moves the quill down or up at slow speed
  • Depth stop adjusted, can be set to limit the downward travel for the quill, provides a repeatable depth of travel
  • Operation control box houses the lamp and coolant switches, the emergency stop button, and the power control
  • Electrical enclosure houses electrical components and wire terminal strips
  • Machine base supports milling machine and houses the coolant tank
  • Chip and drip tray collect chips and coolant which goes bank to tank
Table Size (W x L/In. | mm) 10 x 54.015 | 254 x 1,372
Spindle Taper NMTB-40
Number of Spindle Speeds Electronic Variable Speed
Range of Spindle Speeds (RPM) 80 - 3,800
Spindle Diameter (In. | mm) 3.93 | 99.82
Spindle Feed per Revolution (IPR | MMPR) .0015 | .0031 | .0051 | .04 | .08 | .13
Spindle Travel (In. | mm) 5 | 127
Spindle Head Swivel (Right or Left | Front or Rear) 90° | 45°
Spindle Nose to Table (Min. - Max./In. | mm) 1.57 - 17.51 | 40 - 445
Spindle Center to Column (Min. - Max./In. | mm) 7.78 - 26.77 | 200 - 680
Table Longitudinal Travel/Manual - X-Axis (In. | mm) 35.43 | 900
Table Cross Travel/Manual - Y-Axis (In. | mm) 15.74 | 400
Table Knee Travel/Manual - Z-Axis (In. | mm) 15.98 | 406
Table Longitudinal Travel/Auto - X-Axis (In. | mm) 32.28 | 820
Table Cross Travel/Auto - Y-Axis (In. | mm) 15.74 | 400
Table Knee Travel/Auto - Z-Axis (In. | mm) 15.98 | 406
Ram Cross Travel (In. | mm) 18.89 | 480
Table Load Capacity (Lbs. | Kgs.) 550 | 250
Table T-Slots (Number @ Width/In. | mm) 3 @ .625 | 15.875
Spindle Motor (HP | kW) 3 | 2.23
Electric Power Requirement 220V/3 Phase/60 Hz.
Coolant Pump Motor (HP | Watt) 1/8 | 93.21
Coolant Tank Capacity (Gallons | Liters) 7.5 - 8 | 28.39 - 30.28
Shipping Dimensions (L x W x H/In. | mm) 60 x 60 x 87 | 1,524 x 1,524 x 2,210
Shipping Weight (Lbs. | Kgs.) 3,007.1 | 1,364
Design and specifications are subject to change without notice.
  • MITUTOYO® 2-Axis Digital Readout System Installed
  • X-Axis Power Feed Installed
  • Y-Axis Power Feed Installed
  • Z-Axis Power Feed Installed
  • Air Powered Draw Bar Installed
  • 5/8" - 11 TPI Draw Bar
  • Way Covers
  • Halogen Work Light
  • Electrical Enclosure
  • One Shot Lubrication System
  • Coolant Hose with Clamps
  • Chip and Drip Tray
  • Tool Box with Tools
This website uses cookies to ensure you get the best experience on our website. This use may include analytics, personalization and ads. Learn More