Menu
Your Cart

BAILEIGH 1008232 VM-949-1 9" X 49" ELECTRONIC VARIABLE SPEED VERTICAL MILLING MACHINE WITH MITUTOYO 2-AXIS DRO AND X, Y & Z-AXIS POWER FEEDS & POWER DRAW BAR

BAILEIGH 1008232 VM-949-1 9" X 49" ELECTRONIC VARIABLE SPEED VERTICAL MILLING MACHINE WITH MITUTOYO 2-AXIS DRO AND X, Y & Z-AXIS POWER FEEDS & POWER DRAW BAR
BAILEIGH 1008232 VM-949-1 9" X 49" ELECTRONIC VARIABLE SPEED VERTICAL MILLING MACHINE WITH MITUTOYO 2-AXIS DRO AND X, Y & Z-AXIS POWER FEEDS & POWER DRAW BAR
$22,979.00
  • Stock: In Stock
  • Model: VM-949-1
  • Weight: 2,200.00lb
  • Dimensions:
  • 60.00in x 60.00in x 83.03in
  • SKU: 1008232
  • This vertical milling machine is no exception and is great for any small to medium size machine shop or fabrication shop, it's packed with tons of standard features that are options on most other brands
  • This vertical milling machine is a fully variable speed through the use of a YASKAWA® inverter drive
  • Available in two different voltages, 220 Volt/1 Phase and 3 Phase, these variances allow it to be used in almost any shop
  • Adjustable spindle speeds from 60 to 4,200 RPM, help prolong tooling life as well as allows some applications that cannot be done on a standard drill press, such as thermal friction drilling
  • MITUTOYO® 2-Axis digital readout system for positioning down to 1/10 of a thousandth of an inch
  • Powerful 3 HP | 2.23 kW motor that runs on 220V/1 Phase/60 Hz. electric power
  • The best castings to make the base and frame work out of for better the cutting is. This is not the place to use an inferior process
  • The spindle has specified a NMTB-40 spindle taper. This type spindle is stronger and give the operator a choice of larger tooling should the need arise
  • Spindle head can swivel 90° right or left and 45° front or rear, the ram can revolve horizontally by an angle of 180°
  • 3 Position - Forward | Stop | Reverse, switch to control rotation of spindle
  • Micro feed spindle headwheel, when engaged, this manual moves the quill down or up at slow speed
  • Depth stop adjusted, can be set to limit the downward travel for the quill, provides a repeatable depth of travel
  • Operation control box houses the lamp and coolant switches, the emergency stop button, and the power control
  • Electrical enclosure houses electrical components and wire terminal strips
  • Machine base supports milling machine and houses the coolant tank
  • Chip and drip tray collect chips and coolant which goes bank to tank
Table Size (W x L/In. | mm) 9.055 x 49.015 | 230 x 1,245
Spindle Taper NMTB-40
Number of Spindle Speeds Electronic Variable Speed
Range of Spindle Speeds (RPM) 60 - 4,200
Spindle Diameter (In. | mm) 3.346 | 85
Spindle Feed per Revolution (IPR | MMPR) .0015 | .003 | .005 | .0381 | .0762 | .127
Spindle Travel (In. | mm) 5 | 127
Spindle Head Swivel (Right or Left | Front or Rear) 90° | 45°
Spindle Nose to Table (Min. - Max./In. | mm) 2.24 - 18.22 | 57 - 463
Spindle Center to Column (Min. - Max./In. | mm) 8.46 - 20.98 | 215 - 533
Table Longitudinal Travel/Manual - X-Axis (In. | mm) 28.54 | 725
Table Cross Travel/Manual - Y-Axis (In. | mm) 12 | 305
Table Knee Travel/Manual - Z-Axis (In. | mm) 15.98 | 406
Table Longitudinal Travel/Auto - X-Axis (In. | mm) 25.19 | 640
Table Cross Travel/Auto - Y-Axis (In. | mm) 12 | 305
Table Knee Travel/Auto - Z-Axis (In. | mm) 15.98 | 406
Ram Cross Travel (In. | mm) 12.59 | 320
Table Load Capacity (Lbs. | Kgs.) 440.92 | 200
Table T-Slots (Number @ Width/In. | mm) 3 @ .625 | 15.875
Spindle Motor (HP | kW) 3 | 2.23
Electric Power Requirement 220V/1 Phase/60 Hz.
Coolant Pump Motor (HP | Watt) 1/8 | 93.21
Shipping Dimensions (L x W x H/In. | mm) 60 x 60 x 83.03 | 1,524 x 1,524 x 2,109
Shipping Weight (Lbs. | Kgs.) 2,200 | 997.9
Design and specifications are subject to change without notice.
  • MITUTOYO® 2-Axis Digital Readout System Installed
  • X-Axis Power Feed Installed
  • Y-Axis Power Feed Installed
  • Z-Axis Power Feed Installed
  • Air Powered Draw Bar Installed
  • 5/8" - 11 TPI Draw Bar
  • Way Covers
  • Halogen Work Light
  • Electrical Enclosure
  • One Shot Lubrication System
  • Coolant Hose with Clamps
  • Chip and Drip Tray
  • Tool Box with Tools
This website uses cookies to ensure you get the best experience on our website. This use may include analytics, personalization and ads. Learn More