Menu
Your Cart

SHARP 1640L 16" X 40" GEARED HEAD PRECISION ENGINE LATHE

SHARP 1640L 16" X 40" GEARED HEAD PRECISION ENGINE LATHE
SHARP 1640L 16" X 40" GEARED HEAD PRECISION ENGINE LATHE
$25,690.00
  • Stock: In Stock
  • Model: 1640L
  • Weight: 3,600.00lb
  • Dimensions:
  • 85.00in x 32.00in x 47.00in
  • SKU: 1640L
  • Hardened and ground alloy steel spindle supported by two high precision tapered roller bearings and one high precision ball bearing to ensure accuracy and stability
  • The unparalleled spindle design headstock uses special adjustable blocks can guarantee vibration free turning even irregular material on high speeds
  • Hardened and ground headstock gears and shafts are lubricated in oil bath
  • 3-1/16" Spindle bore for large workpiece
  • Heavy duty D1-8 camlock spindle nose
  • Induction hardened and ground bedways for rigid structure
  • One-piece Meehanite® castings base for uniform construction and durability
  • Removable gap for large diameter applications
  • The special pin locks lever into position on gear shifting levers to prevent the handle out of place accidentally or being shifted during heavy cuttings
  • Totally enclosed oil bathed gearbox design use levers to set different threads and feeds
  • Inch and metric dual dials with direct readings for cross and compound feeds
  • Thread and feed chart for inch and metric
  • Directional control of carriage feed lever at side of apron for easy operations
  • Centralized push button controls with emergency stop and spindle jog
  • Tailstock has tang slot and inch/metric graduations on the quill
  • Electrically activated foot brake for quick stopping action
  • Complete coolant system equipped
  • Standard with full length splash guard
  • Dual voltage electrics for 220V/440V/3 Phase/60 Hz., specify when ordering
  • Photo shown with optional accessories installed
Swing Over Bed (In.)
16
Swing Over Cross Slide (In.) 8-3/4
Swing Over Gap (In.) 24-3/8
Gap Width in Front of Face Plate (In.) 9-3/4
Distance Between Centers (In.) 40
Length of Bed (In.) 59
Width of Bed (In.) 11-3/4
Cross Slide Travel (In.) 9-1/2
Compound Slide Travel (In.) 4.9
Width of Compound (In.)
4.5
Spindle Through Hole Diameter (In.)
3-1/16
Spindle Nose - Camlock
D1-8
Spindle Bore Taper (w/Sleeve)
MT-6 (MT-4)
Number of Spindle Speeds
12
Range of Spindle Speeds (RPM)
40 - 2,000
Number of Longitudinal Feeds
18
Range of Longitudinal Feeds (IPR)
.002 - .032
Number of Cross Feeds
12
Range of Cross Feeds (IPR)
.0001 - .0094
Number of Inch Threads 36
Range of Inch Threads (TPI) 4 - 56
Number of Metric Threads
17
Range of Metric Threads (mm)
.5 - 7
Leadscrew Diameter (In.) 1-3/8
Leadscrew Thread Pitch (TPI) 4
Tailstock Quill Travel (In.) 5
Tailstock Quill Diameter (In.) 2-1/4
Tailstock Quill Taper MT-4


Main Motor (HP)

7-1/2
220V/440V/3 Phase/60 Hz.,
Prewired 220V
Motor Transformer Installed - Optional 380V or 575V/3 Phase
Power Consumptions (Volts | kVA | Amps)220 | 8 | 25
Power Consumptions (Volts | kVA | Amps)
440 | 8 | 12.5
Machine Dimensions (L x W x H/In.)
85 x 32 x 47
Net Weight (Lbs.) 3,600
Design and specifications are subject to change without notice.
  • BISON 10" 3-Jaw Scroll Chuck with Top Reversible Jaws
  • Steady Rest with Brass Jaws - 1/2" - 6" Capacity
  • Follow Rest - .59" - 2.76" Capacity
  • 16" Face Plate
  • American Tool Post
  • Thread Chasing Dial
  • Longitudinal Carriage Stops
  • Center Sleeve, MT-5 x MT-3
  • Dead Centers, MT-4 and MT-5
  • Halogen Work Light
  • Foot Brake
  • Complete Coolant System
  • Full Length Splash Guard
  • Toolbox with Tools
  • 380V or 575V/3 Phase/60 Hz. Transformer
  • 10 HP Motor Upgrade - Factory Installed
  • BISON 10" 3-Jaw Scroll Chuck with Top Reversible Jaws
  • BISON 12" 3-Jaw Scroll Chuck with Top Reversible Jaws
  • BISON 12" 4-Jaw Independent Chuck with Top Reversible Jaws
  • ACU-RITE 2-Axis Digital Readout System Lathe Package with Installation
  • FAGOR 2-Axis Digital Readout System Lathe Package with Installation 
  • NEWALL 2-Axis Digital Readout System Lathe Package with Installation
  • ALORIS Quick Change Tool Post with 4 Holders
  • JFK 5C Lever Type Collet Closer with Installation
  • LYNDEX 5C Round Collet Set, 16 Pc/Set, 1/8" - 1" x 1/16"
  • JACOBS Ball Bearing Drill Chuck and Arbor
  • Steady Rest with Brass Jaws, 4" - 9" Capacity
  • Roller Jaws for Steady Rest, 3 Pc/Set
  • 4-Way Tool Post and Installation
  • Micrometer Carriage Stop
  • Taper Turning Attachment with Installation
  • Live Center, MT-4
  • Spindle End Safety Cover - Factory Installed
  • Tool Guard with Limited Switch - Factory Installed
  • Chuck Guard with Limited Switch - Factory Installed
  • Leadscrew Guard - Factory Installed
  • UL Rated Electrical Parts & Motor
  • CSA Rated Electrical Parts & Motor
This website uses cookies to ensure you get the best experience on our website. This use may include analytics, personalization and ads. Learn More