Menu
Your Cart

BAILEIGH 1008169 VM-1258-3 12" X 58" ELECTRONIC VARIABLE SPEED VERTICAL MILLING MACHINE WITH MITUTOYO 2-AXIS DRO AND POWER DRAW BAR

BAILEIGH 1008169 VM-1258-3 12" X 58" ELECTRONIC VARIABLE SPEED VERTICAL MILLING MACHINE WITH MITUTOYO 2-AXIS DRO AND POWER DRAW BAR
BAILEIGH 1008169 VM-1258-3 12" X 58" ELECTRONIC VARIABLE SPEED VERTICAL MILLING MACHINE WITH MITUTOYO 2-AXIS DRO AND POWER DRAW BAR
$42,239.00
  • Stock: In Stock
  • Model: VM-1258-3
  • Weight: 4,300.00lb
  • Dimensions:
  • 73.00in x 66.00in x 83.00in
  • SKU: 1008169
  • This vertical milling machine features a whopping 12" x 58" table, one of the largest table size on manual mill
  • The whole machine has been built to reflect the size and weight that this table brings, in order to build a machine this big, rigidity has to come into the equation
  • The best castings as the starting point for this mill and stronger makes the platform the better the cutting is
  • This vertical milling machine is a fully variable speed through the use of a YASKAWA® inverter drive
  • Adjustable spindle speeds from 80 to 3,800 RPM. Being able to choose the correct RPM will make for longer lasting tooling and better cuts
  • MITUTOYO® 2-Axis digital readout system for positioning down to 1/10 of a thousandth of an inch
  • Powerful 5 HP motor that runs on 220V/3 Phase/60 Hz. electric power
  • The spindle has specified a NMTB-40 spindle taper to giving the operator a choice of larger tooling should the need arise
  • The X and Y-axis have square slide ways with covers and ball screws for the best movement
  • Movement on the three axis are powered to make it easier to operate
  • Spindle head can swivel 90° right or left and 45° front or rear, the ram can revolve horizontally by an angle of 180°
  • 3 Position - Forward | Stop | Reverse, switch to control rotation of spindle
  • Micro feed spindle headwheel, when engaged, this manual moves the quill down or up at slow speed
  • Depth stop adjusted, can be set to limit the downward travel for the quill, provides a repeatable depth of travel
  • Operation control box houses the lamp and coolant switches, the emergency stop button, and the power control
  • Electrical enclosure houses electrical components and wire terminal strips
  • Machine base supports milling machine and houses the coolant tank
  • Chip and drip tray collect chips and coolant which goes bank to tank
Table Size (W x L/In.) 12 x 58
Spindle Taper NMTB-40
Number of Spindle Speeds Electronic Variable Speed
Range of Spindle Speeds (RPM) 80 - 3,800
Spindle Diameter (In.) 3.93
Spindle Feed per Revolution (IPR) .0035 | .07 | .14
Spindle Travel (In.) 5.51
Spindle Head Swivel (Right or Left | Front or Rear) 90° | 45°
Spindle Nose to Table (Min. - Max./In.) 1.37 - 19.09
Spindle Center to Column (Min. - Max./In.) 5.11 - 21.65
Table Longitudinal Travel/Manual - X-Axis (In.) 36.61
Table Cross Travel/Manual - Y-Axis (In.) 15.74
Table Knee Travel/Manual - Z-Axis (In.) 17.71
Table Longitudinal Travel/Auto - X-Axis (In.) 36.22
Table Cross Travel/Auto - Y-Axis (In.) 14.96
Table Knee Travel/Auto - Z-Axis (In.) 17.71
Ram Cross Travel (In.) 16.53
Table Load Capacity (Lbs.) 770
Table T-Slots (Number @ Width/In.) 3 @ .625
Spindle Motor (HP) 5
Electric Power Requirement 220V/3 Phase/60 Hz.
Coolant Pump Motor (HP) 1/8
Shipping Dimensions (L x W x H/In.) 73 x 66 x 83
Shipping Weight (Lbs.) 4,300
Design and specifications are subject to change without notice.
  • MITUTOYO® 2-Axis Digital Readout System Installed
  • Air Powered Draw Bar Installed
  • 5/8" - 11 TPI Draw Bar
  • Way Covers
  • Halogen Work Light
  • Electric Operation Panel
  • Electrical Enclosure
  • Auto Lubrication System
  • Coolant Hose with Clamps
  • Chip and Drip Tray
  • Tool Box with Tools
This website uses cookies to ensure you get the best experience on our website. This use may include analytics, personalization and ads. Learn More