Menu
Your Cart

BAILEIGH 1008192 VM-942-1 9" X 42" VARIABLE SPEED VERTICAL MILLING MACHINE WITH 3-AXIS (KNEE) DRO AND X, Y & Z-AXIS POWER FEEDS

BAILEIGH 1008192 VM-942-1 9" X 42" VARIABLE SPEED VERTICAL MILLING MACHINE WITH 3-AXIS (KNEE) DRO AND X, Y & Z-AXIS POWER FEEDS
BAILEIGH 1008192 VM-942-1 9" X 42" VARIABLE SPEED VERTICAL MILLING MACHINE WITH 3-AXIS (KNEE) DRO AND X, Y & Z-AXIS POWER FEEDS
$20,339.00
  • Stock: In Stock
  • Model: VM-942-1
  • Weight: 2,200.00lb
  • Dimensions:
  • 60.00in x 60.00in x 83.00in
  • SKU: 1008192
  • The perfect mill for getting into machining for milling, drilling, tapping, boring, and reaming
  • This vertical milling machine meet any shops requirements, whether it is price, size, or power
  • Perfect for the machine shop or even a garage at the house
  • Meehanite® castings for superior rigidity and Turcite B® coated ways and guides for extreme durability 
  • 3-Axis Digital readout system displays positioning functions for machine tool processing
  • Powerful 3 HP | 2.23 kW motor that runs on 220V/1 Phase/60 Hz. electric power
  • A fully variable speed milling machine that allows infinite adjustment to the speed from 80 to 2,700 RPM
  • Being able to fine tune the speed of the quill is important in prolonging tooling life and saving money
  • Spindle head can swivel 90° right or left and 45° front or rear, the ram can revolve horizontally by an angle of 180°
  • The spindle has specified a NMTB-40 spindle taper helps eliminate chatter and run out during the cutting process and make better cuts
  • 3 Position - Forward | Stop | Reverse, switch to control rotation of spindle
  • Micro feed spindle headwheel, when engaged, this manual moves the quill down or up at slow speed
  • Depth stop adjusted, can be set to limit the downward travel for the quill, provides a repeatable depth of travel
  • Operation control box houses the lamp and coolant switches, the emergency stop button, and the power control
  • Electrical enclosure houses electrical components and wire terminal strips
  • Machine base supports milling machine and houses the coolant tank
  • Chip and drip tray collect chips and coolant which goes bank to tank
Table Size (W x L/In. | mm) 9.055 x 42 | 230 x 1,067
Spindle Taper NMTB-40
Number of Spindle Speeds Infinitely Variable Speed
Range of Spindle Speeds (RPM) 60 - 4,200
Spindle Diameter (In. | mm) 3.37 | 85.6
Spindle Feed per Revolution (IPR | MMPR) .0015 | .0031 | .0059 | .04 | .08 | .15
Spindle Travel (In. | mm) 5 | 127
Spindle Head Swivel (Right or Left | Front or Rear) 90° | 45°
Spindle Nose to Table (Min. - Max./In. | mm) 0 - 15.98 | 0 - 406
Spindle Center to Column (Min. - Max./In. | mm) 0 - 12 | 0 - 305
Table Longitudinal Travel/Manual - X-Axis (In. | mm) 30 | 762
Table Cross Travel/Manual - Y-Axis (In. | mm) 12 | 305
Table Knee Travel/Manual - Z-Axis (In. | mm) 15.98 | 406
Table Longitudinal Travel/Auto - X-Axis (In. | mm) 28.5 | 724
Table Cross Travel/Auto - Y-Axis (In. | mm) 12 | 305
Table Knee Travel/Auto - Z-Axis (In. | mm) 15.98 | 406
Ram Cross Travel (In. | mm) 12 | 305
Table Load Capacity (Lbs. | Kgs.) 771.61 | 350
Table T-Slots (Number @ Width/In. | mm) 3 @ .629 | 16
Spindle Motor (HP | kW) 3 | 2.23
Electric Power Requirement 220V/1 Phase/60 Hz.
Coolant Pump Motor (HP | Watt) 1/8 | 93.21
Shipping Dimensions (L x W x H/In. | mm) 60 x 60 x 82.99 | 1,524 x 1,524 x 2,108
Shipping Weight (Lbs. | Kgs.) 2,200 | 997.9
Design and specifications are subject to change without notice.
  • 3-Axis (X, Y and Knee) Digital Readout System Installed
  • X-Axis Power Feed Installed
  • Y-Axis Power Feed Installed
  • Z-Axis Power Feed Installed
  • 5/8" - 11 TPI Draw Bar
  • Way Covers
  • Halogen Work Light
  • Electrical Enclosure
  • One Shot Lubrication System
  • Coolant Hose with Clamps
  • Chip and Drip Tray
  • Tool Box with Tools
This website uses cookies to ensure you get the best experience on our website. This use may include analytics, personalization and ads. Learn More