Menu
Your Cart

SHARP 1440F 14" X 40" GEARED HEAD GAP BED ENGINE LATHE

SHARP 1440F 14" X 40" GEARED HEAD GAP BED ENGINE LATHE
SHARP 1440F 14" X 40" GEARED HEAD GAP BED ENGINE LATHE
$16,150.00
  • Stock: In Stock
  • Model: 1440F
  • Weight: 1,650.00lb
  • Dimensions:
  • 75.50in x 29.00in x 46.50in
  • SKU: 1440F
  • Forge steel spindle supported by two high precision tapered roller bearings to ensure precise, reliable turning at any speed
  • Heavy duty D1-4 camlock spindle nose
  • Hardened and ground headstock gears and shafts are lubricated in oil bath
  • Induction hardened and ground bedways for rigid structure
  • 8-1/8" Extra wide bedways with a large apron, compound and a generous 13-1/4" cross slide allows heavier cutting with less vibration
  • Removable gap for large diameter applications
  • Carriage equipped with overload clutch to protect gears and leadscrews
  • Totally enclosed gearbox design use levers to set different threads and feeds
  • Thread and feed chart for inch and metric
  • Inch and metric dual dials with direct readings for cross and compound feeds
  • Directional control of carriage feed at side of apron for easy operation
  • Centralized push button controls with emergency stop and spindle jog
  • Heavy cast iron base to ensure rigid and stable operation for the life of the machine
  • Tailstock has tang slot and inch/metric graduations on quill
  • Electrically activated foot brake for quick stopping action
  • Frontal removal chip and coolant tray
  • Standard with full length splash guard
  • Standard electrical voltage for 220V/3 Phase/60 Hz., special order for voltage wiring on 440V when ordering
Swing Over Bed (In. | mm) 14.01 | 355.85
Swing Over Cross Slide (In. | mm) 8-5/8 | 219.07
Swing Over Gap (In. | mm) 20 | 508
Gap Width in Front of Face Plate (In. | mm) 9-1/4 | 234.95
Width of Bed (In. | mm) 8-1/8 | 206.37
Distance Between Centers (In. | mm) 40 | 1016
Cross Slide Travel (In. | mm) 7 | 177.8
Compound Slide Travel (In. | mm) 4 | 101.6
Spindle Through Hole Diameter (In. | mm) 1-1/2 | 38.1
Spindle Nose - Camlock D1-4
Spindle Bore Taper MT-5
Number of Spindle Speeds 16
Range of Spindle Speeds (RPM) 45 - 1,800
Number of Longitudinal Feeds
40
Range of Longitudinal Feeds (IPR) .0012 - .0304
Number of Cross Feeds 40
Range of Cross Feeds (IPR) .0003 - .0076
Number of Inch Threads 40
Range of Inch Threads (TPI) 4 - 112
Number of Metric Threads 22
Range of Metric Threads (mm) .45 - 7.5
Leadscrew Diameter (In. | mm)
7/8 | 22.22
Leadscrew Thread Pitch (TPI)
8
Width of Apron (In. | mm) 11 | 279.4
Length of Bed (In. | mm) 66 | 1,676.4
Tailstock Quill Travel (In. | mm) 4-1/2 | 114.3
Tailstock Quill Diameter (In. | mm) 1-3/4 | 44.45
Tailstock Quill Taper MT-3

Main Motor (HP | kW)
3 | 2.23
220V/3 Phase/60 Hz.,
Special Order for Voltage Wiring 440V
Motor Transformer Installed - Optional 380V, 440V or 575V/3 Phase
Power Consumptions (Volts | kVA | Amps)220 | 3.5 | 10
Power Consumptions (Volts | kVA | Amps)
440 | 3.5 | 5
Machine Dimensions (L x W x H/In.)
75.5 x 29 x 46.5
Net Weight (Lbs.) 1,650
Design and specifications are subject to change without notice.
  • 8" 3-Jaw Scroll Chuck with Top Reversible Jaws
  • Steady Rest with Brass Jaws - 1/4" - 3" Capacity
  • 6" Back Plate
  • 4-Way Tool Post
  • Thread Chasing Dial
  • Center Sleeve, MT-5 x MT-3
  • Dead Centers, MT-3
  • Foot Brake
  • Coolant System
  • Full Length Splash Guard
  • Toolbox with Tools
  • 380V, 440V or 575V/3 Phase/60 Hz. Transformer
  • 5 HP Motor Upgrade - Factory Installed
  • 8" 4-Jaw Independent Chuck with Solid Jaws
  • 10" 4-Jaw Independent Chuck with Solid Jaws
  • BISON 8" 3-Jaw Scroll Chuck with Top Reversible Jaws
  • BISON 8" 4-Jaw Independent Chuck with Top Reversible Jaws
  • ACU-RITE 2-Axis Digital Readout System Lathe Package with Installation
  • FAGOR 2-Axis Digital Readout System Lathe Package with Installation 
  • NEWALL 2-Axis Digital Readout System Lathe Package with Installation
  • ALORIS Quick Change Tool Post with 4 Holders
  • JFK 5C Lever Type Collet Closer with Installation
  • LYNDEX 5C Round Collet Set, 16 Pc/Set, 1/8" - 1" x 1/16"
  • Follow Rest - .4" - 2.17" Capacity
  • Roller Jaws for Steady Rest, 3 Pc/Set
  • Live Center, MT-3
  • Micrometer Carriage Stop
  • 12" Face Plate, D1-4 Mount
  • Taper Turning Attachment with Installation
  • Halogen Work Light
  • UL Rated Electrical Parts & Motor
  • CSA Rated Electrical Parts & Motor
  • Spindle End Safety Cover
  • Tool Guard with Limited Switch
  • Lead Screw Cover
  • Chuck Guard with Limited Switch
This website uses cookies to ensure you get the best experience on our website. This use may include analytics, personalization and ads. Learn More