Menu
Your Cart

SHARP 1340VS 13" X 40" DIGITAL VARIABLE SPEED ENGINE LATHE

SHARP 1340VS 13" X 40" DIGITAL VARIABLE SPEED ENGINE LATHE
SHARP 1340VS 13" X 40" DIGITAL VARIABLE SPEED ENGINE LATHE
$15,425.00
  • Stock: In Stock
  • Model: 1340VS
  • Weight: 1,550.00lb
  • Dimensions:
  • 74.30in x 28.20in x 45.80in
  • SKU: 1340VS
  • Digital Variable Speed (DVS) spindle drive with digital speed display
  • Hi-Lo spindle speed gear shift, range from 40 to 2,000 RPM
  • Forge steel spindle supported by two high precision tapered roller bearings
  • Heavy duty D1-4 camlock spindle nose
  • Hardened and ground headstock gears and shafts are lubricated in oil bath
  • Induction hardened and ground bedways for rigid structure
  • Removable gap for large diameter applications
  • Carriage equipped with overload clutch to protect gears and leadscrews
  • Totally enclosed gearbox design use levers to set different threads and feeds
  • Thread and feed chart for inch and metric
  • Directional control of carriage feed in front of apron for easy operation
  • Centralized push button controls with emergency stop and spindle jog
  • Inch and metric dual dials with direct readings for cross and compound feeds
  • Sturdy cast iron base with built-in tool storage cabinet
  • Tailstock has tang slot and inch/metric graduations on quill
  • Electrically activated foot brake for quick stopping action
  • Frontal removal chip and coolant tray
  • Standard with full length splash guard
  • Available for 220V/3 Phase/60 Hz. or 220V/1 Phase/60 Hz. electric, please specify when ordering
Swing Over Bed (In. | mm) 13 | 330.2
Swing Over Cross Slide (In. | mm) 7-5/8 | 193.67
Swing Over Gap (In. | mm) 18-1/2 | 469.9
Gap Width in Front of Face Plate (In. | mm) 9-1/4 | 234.95
Width of Bed (In. | mm) 7-1/2 | 190.5
Distance Between Centers (In. | mm) 40 | 1016
Cross Slide Travel (In. | mm) 6-3/4 | 171.45
Compound Slide Travel (In. | mm) 3-1/2 | 88.9
Spindle Through Hole Diameter (In. | mm) 1-9/16 | 40
Spindle Nose - Camlock D1-4
Spindle Bore Taper MT-5
Spindle Speeds - 2 Ranges Infinitely Variable
Spindle Speed Range (RPM) Low: 40 - 365
High: 218 - 2,000
Number of Longitudinal Feeds
40
Range of Longitudinal Feeds (IPR) .0016 - .046
Number of Cross Feeds 40
Range of Cross Feeds (IPR) .0005 - .015
Number of Inch Threads 40
Range of Inch Threads (TPI) 2 - 56
Number of Metric Threads 22
Range of Metric Threads (mm) .5 - 12
Leadscrew Diameter (In. | mm)
7/8 | 22.22
Leadscrew Thread Pitch (TPI)
8
Width of Apron (In. | mm) 11 | 279.4
Length of Bed (In. | mm) 64 | 1,625.6
Tailstock Quill Travel (In. | mm) 4 | 101.6
Tailstock Quill Diameter (In. | mm) 1-9/16 | 39.68
Tailstock Quill Taper MT-3
Main Motor (HP | kW) 3 | 2.23
220V/1 or 3 Phase/60 Hz.,
Prewired 220V/3 Phase
Motor Transformer Installed - Optional 380V, 440V or 575V/3 Phase
Power Consumptions (Volts | kVA | Amps)220 | 3 | 10
Power Consumptions (Volts | kVA | Amps)
440 | 3 | 5
Machine Dimensions (L x W x H/In.)
74.3 x 28.2 x 45.8
Net Weight (Lbs.) 1,550
Design and specifications are subject to change without notice.
  • 8" 3-Jaw Scroll Chuck with Top Reversible Jaws
  • Steady Rest with Brass Jaws - 1/4" - 2-1/2" Capacity
  • 6" Back Plate
  • 4-Way Tool Post
  • Thread Chasing Dial
  • Center Sleeve, MT-5 x MT-3
  • Dead Centers, MT-3
  • Foot Brake
  • Coolant System
  • Full Length Splash Guard
  • Toolbox with Tools
  • 380V, 440V or 575V/3 Phase/60 Hz. Transformer
  • 8" 4-Jaw Independent Chuck with Solid Jaws
  • 10" 4-Jaw Independent Chuck with Solid Jaws
  • BISON 8" 3-Jaw Scroll Chuck with Top Reversible Jaws
  • BISON 8" 4-Jaw Independent Chuck with Top Reversible Jaws
  • ACU-RITE 2-Axis Digital Readout System Lathe Package with Installation
  • FAGOR 2-Axis Digital Readout System Lathe Package with Installation 
  • NEWALL 2-Axis Digital Readout System Lathe Package with Installation
  • ALORIS Quick Change Tool Post with 4 Holders
  • JFK 5C Lever Type Collet Closer with Installation
  • LYNDEX 5C Round Collet Set, 16 Pc/Set, 1/8" - 1" x 1/16"
  • Follow Rest - .4" - 2.17" Capacity
  • Roller Jaws for Steady Rest, 3 Pc/Set
  • Live Center, MT-3
  • Micrometer Carriage Stop
  • 12" Face Plate, D1-4 Mount
  • Taper Turning Attachment with Installation
  • Halogen Work Light
  • UL Rated Electrical Parts & Motor
  • CSA Rated Electrical Parts & Motor
  • Spindle End Safety Cover
  • Tool Guard with Limited Switch
  • Lead Screw Cover
  • Chuck Guard with Limited Switch
This website uses cookies to ensure you get the best experience on our website. This use may include analytics, personalization and ads. Learn More