Home  |  About Us  |  Contact  |  Sign-In  |  Order StatusShopping Cart   

Category  Category
Metalworking Machinery > Manual > Turning Machines > REPUBLIC
Metalworking Machinery > Manual > Turning Machines > Swing over Bed > 11" - 15"
Metalworking Machinery > Manual > Turning Machines > Distance between Centers > 31" - 40"
Related Items  Related Items
REPUBLIC RL-1460-G-TW TRI-WAY HIGH SPEED LATHE
REPUBLIC RL-1460-G-TW TRI-WAY HIGH SPEED LATHE
Stock #RL-1460-G-TW
$18,235.00

REPUBLIC RL-1440TW-EVS-T TRI-WAY HIGH SPEED LATHE
REPUBLIC RL-1440TW-EVS-T TRI-WAY HIGH SPEED LATHE
Stock #RL-1440TW-EVS-T
$19,406.00

REPUBLIC RL-1440TW-EVS-A TRI-WAY HIGH SPEED LATHE
REPUBLIC RL-1440TW-EVS-A TRI-WAY HIGH SPEED LATHE
Stock #RL-1440TW-EVS-A
$25,651.00
Item Details  Item Details
REPUBLIC RL-1440-G-TW TRI-WAY HIGH SPEED LATHE Item Name
REPUBLIC RL-1440-G-TW TRI-WAY HIGH SPEED LATHE
Stock #
RL-1440-G-TW
Model #
RL-1440-G-TW
Price/ea:
$16,073.00

STANDARD FEATURES
• Geared headstock housing is vibration-absorbent and deflection-free. Gears are hardened and MAAG or Reishauer ground
• Electronic 1/4 HP pump in headstock - pressure lubricated to prolong life expectancy of the gears and spindle. Combination of forced lubrication and oil bath system
• Heavy duty spindle machined from forged alloy steel, hardened, ground and dynamically balanced with D1-6 camlock spindle nose.
• Spindle is supported by three point precision bearings, two taper roller bearings and one ball bearing
• 16 Spindle speeds with Hi-Lo speed range
• Meehaniteฎ casting bed, vibration stress relieved. Tri-way design, with three (3) Vee ways, induction hardened and precision ground bedways, maintains perfect alignment of carriage on bed and eliminates any twisting
• Precision hand scraped removable gap block for increased swing
• One piece cast base, no pedestal, for maximum rigidity
• Turciteฎ B anti-friction material between bed and carriage
• Universal gear box, a wide range of both U.S. and metric, MP, DP, threads without changing any end train gears to save time
• Totally enclosed double wall type apron
• Forward-Off-Reverse spindle control provided by gated lever. Integrated automatic control for longitudinal and cross feeds. Left hand wheel is standard equipped. Right hand wheel can be available
• Carriage and cross slide, anti-float design, backlash eliminator fitted in cross slide nut. Threading engagement lever, safety clutch at feed shaft, one shot lubrication in carriage and compound slide
• Inch and metric micrometer dual dials with direct readings for cross and compound feeds
• Thread and feed chart for inch and metric
• T-slotted compound with square 4 position tool post
• Tailstock has tang slot and inch/metric graduations on quill
• Centralized push button controls with emergency stop and spindle jog
• Safety features, low voltage controls, nylon safety gears in end train, shear pin in leadscrew
• Safety guarding, available certain safety shields and guards applicable to meet the intent of OSHA and may be appropriate for some application
• Flood coolant system
• Front removable chip tray
• Full length foot brake
• Full length rear splash guard
• Standard electrics arranged for 220V/3 Phase/60 Hz. operation
• Tolerance test certificate included
Stock Number

RL-1440-G-TW

Model

RL-1440-G-TW

SPECIFICATIONS

Swing over Bed (in.)

14-3/16

Swing over Cross Slide (in.)

8-3/8

Swing in Gap (in.)

21

Distance between Centers (in.)

40

Spindle Hole (in.)

2-1/16

Spindle Nose Camlock D1-6

Number of Spindle Speeds

16

Range of Spindle Speeds (RPM)

Low: 40 - 1,000
High: 80 - 2,000

Carriage Length on Bed (in.)

20

Carriage Width of Bridge (in.)

16-1/15

Cross Slide Travel (in.) 8-11/16
Top Slide Travel (in.) 5-1/2
Range of Longitudinal Feeds (in./rev.) 0.002 - 0.067
Range of Cross Feeds (in./rev.) 0.001 - 0.034
Number of lnch Threads 45
Range of Inch Threads (T.P.I.) 2 - 72
Number of Metric Threads 39
Range of Metric Threads (mm) 0.2 - 14
Number of Modular Threads 18
Range of Modular Threads (M) 0.3 - 3.5
Number of Diametral Pitch 21
Range of Diametral Pitch (DP) 8 - 44
Bed Width (in.) 10-1/4
Standard Bedway Design
("V" Ways/Flat Ways)
2/2
Tailstock Quill Diameter (in.) 2.56
Tailstock Quill Taper MT-4
Tailstock Quill Travel (in.) 6-1/2

Main Motor

5 HP,
220V/3 Phase/60 Hz.

Coolant Pump Motor

1/8 HP

Shipping Weight (lbs.)

3,190

Shipping Overall Dimensions (in./L x W x H) 83 x 44 x 69
STANDARD ACCESSORIES
• 4-Way Tool Post
• Back Plate
• Thread Chasing Dial
• Center Sleeve
• MT-4 Dead Centers
• Leveling Pads
• Foot Brake
• Coolant System
• Full Length Rear Splash Guard
• Service Tools
OPTIONAL ACCESSORIES - Please call for more detail information
• Electronic Variable Speed (EVS) Drive, 5 HP Main Motor Upgrade
• NFPA-79/NEMA 12-JIC Electrics Equipped
• Voltage Wired for 440V/3 Phase/60 Hz.
• 6" Universal 3-Jaw Chuck
• 8" Universal 3-Jaw Chuck
• 10" Independent 4-Jaw Chuck
• 6" Capacity Steady Rest with Roller Jaws
• Follow Rest
• 12" Face Plate
• MT-4 Live Center
• Micrometer Carriage Stop
• Chuck Safety Guard with Safety Switch
• Halogen Work Light
• 5C Handwheel Type Collet Closer with Installation
• 5C Lever Type Collet Closer with Installation
• Quick Change Tool Post and Holders Set
• Telescopic Taper Attachment with Installation
• Tool Post Grinder
• Hydraulic Tracing Attachment
• 6-Position Bed Turret, 3-1/2" Stroke, 1" Maximum Blind Hole
• Digital Readout System with Installation 
• Digital Readout System with Constant Surface Speed (CSS) for EVS Machine with Installation
 Buy Now 
 Quantity: 
 Email to A Friend 

Terms and Conditions
Copyrightฉ 2000, 2007 The Tool Company, Inc. - All rights reserved.