|
|
 |
 |
Item Details |
 |
|
|
|
|
Item Name
JET GH-1440ZX 14" x 40" LARGE SPINDLE BORE LATHE
Stock #
321910
Model #
GH-1440ZX
Free shipping to any Residential or Commercial address
with off-loading capability in 48 States.
Redelivery or Tailgate service NOT included! |
| STANDARD FEATURES |
| • |
Uniquely designed exclusively by JET® |
| • |
ISO 9001 Certified manufacturer |
| • |
3-1/8" Bore spindle is supported by two tapered and one ball bearing |
| • |
Chrome molybdenum headstock gears are hardened, ground, and shaved |
| • |
Universal gearbox allows inch, metric, diametral, and module pitch threads, no change gears required |
| • |
Carriage features one-shot lubrication and Turcite-B on bed sliding surfaces |
| • |
T-slotted compound slide featuring a four-way tool post |
| • |
One-piece cast iron base absorbs vibration allowing heavier cuts |
| • |
High quality ANSI Class 50 wear-resistant cast iron bed ways are hardened and ground |
| • |
Removable gap allows up to 23-5/8" diameter work |
| • |
Five position automatic carriage stop increases productivity |
| • |
Attractive chrome control levers, dials, and knobs complete this impressive package |
| • |
Tolerance test certificate included |
| NOTE: Rotary phase converter must be 10 HP or higher with high torque kit. Use of static phase converter will void warranty. |
| Stock Number |
321910 |
|
Model |
GH-1440ZX |
|
SPECIFICATIONS |
|
Swing over Bed (in.) |
14 |
|
Swing over Cross Slide (in.) |
7-5/8 |
|
Swing through Gap (in.) |
23-5/8 |
|
Length of Gap (in.) |
12-1/4 |
|
Distance between Centers (in.) |
40 |
|
Spindle Bore (in.) |
3-1/8 |
| Spindle Mount |
D1-8 |
| Spindle Taper (with Sleeve) |
MT-7 (MT-5) |
|
Number of Spindle Speeds |
12 |
|
Range of Spindle Speeds (RPM) |
42 - 1,800 |
| Number of Longitudinal & Cross Feeds |
122 |
| Range of Longitudinal Feeds (in./rev.) |
0.0015 - 0.0913 |
| Range of Cross Feeds (in./rev.) |
0.0006 - 0.0365 |
| Number of lnch Threads |
61 |
| Range of Inch Threads (TPI) |
1-5/8 - 72 |
| Number of Metric Threads |
24 |
| Range of Metric Threads (mm) |
0.05 - 20 |
| Maximum Tool Size (in.) |
1 x 1 |
| Maximum Compound Slide Travel (in.) |
5-1/8 |
| Maximum Cross Slide Travel (in.) |
9 |
| Maximum Carriage Travel (in.) |
35 |
| Tailstock Spindle Travel (in.) |
5 |
| Tailstock Taper |
MT-4 |
| Steady Rest Capacity (in.) |
3/8 - 7 |
| Follow Rest Capacity (in.) |
1/2 - 3-1/2 |
| Width of Bed (in.) |
13-3/8 |
|
Motor |
7-1/2 HP,
230V/460V/3 Phase/60 Hz.,
Prewired 230V |
| Overall Dimensions (in./L x W x H) |
97-1/2 x 40 x 46-7/8 |
| Net Weight (lbs.) |
5,187 |
|
|
| STANDARD EQUIPMENT |
| • |
10" 3-Jaw Direct Mount Chuck with Top Reversing Jaws |
| • |
12" 4-Jaw Chuck |
| • |
12" Faceplate |
| • |
Four-way Tool Post |
| • |
Large Capacity Steady Rest |
| • |
Follow Rest |
| • |
Fully Integrated Coolant System |
| • |
Full Length Splash Guard and Coolant Return |
| • |
Large Easy to Use Foot Brake |
| • |
Articulating Halogen Work Lamp |
| • |
Centrally Located Controls with Jog Button |
| • |
Threading Dial |
| • |
Mounting Pads and Levelers |
| • |
Spindle Sleeve (MT-7 - MT-5) |
| • |
Dead Center |
| • |
Live Center |
| • |
Tool Box and Adjusting Tools | |
|
|
|
)