Home  |  About Us  |  Contact  |  Sign-In  |  Order StatusShopping Cart   

Category  Category
Metalworking Machinery > Manual > Milling/Boring Machines > LAGUN
Metalworking Machinery > Manual > Milling/Boring Machines > Spindle Taper > R-8
Metalworking Machinery > Manual > Milling/Boring Machines > Table Size > 10" x 44" - 10" x 56"
Related Items  Related Items
Stock #FTV-1-EVS
Item Details  Item Details
Stock #
Model #


Made in Spain

Special high strength gray iron Meehanite® castings with physical and chemical properties providing low clamping capacity, high modulus of elasticity, and excellent wear characteristics
Head is mounted to heavy duty ram with knuckle joint, for maximum rigidity. Worm gear arrangement provides head tilts ± 45° front to rear and swivels ± 90° left to right for added versatility. Head and ram assembly can be easily rotated a full 360°
3 HP Constant, manual variable speed drive, dynamically balanced head with high velocity cooling system
55 - 4,250 RPM Infinite variable spindle speed in hi-low ranges for maximum torque and horsepower. Round tooth timing belt for high torque at low speed ranges
Hard chromed 3-3/8" diameter quill with precision ground rack
Four Fafnir® P-7 (or Barden® P-7) spindle bearings on super precision R-8 taper spindle. NST-30, NST-40 or universal spindle taper and Erickson® threaded spindle nose, less nut, as options
Head mounted with forward-neutral-reverse switch and column mounted coolant on-off switch
The high tensile strength castings normally have a Brinnell® hardness of 190 to 230HB while hardened surfaces, such as: ways, table top and front, are approximate 480HB, or about Rockwell® 50C scale
Precision hardened and ground table surface, and with combination box and dovetail design hardened and ground ways
The saddle has a full 23" of bearing length supporting the table, allowing workpiece weights up to 750 pounds
Convenient front located table and saddle locks. Clamp handles are spring loaded to allow repositioning once locked

Leadscrews rolled and ground to provide better accuracy and with a high nickel content to improve durability. Adjustable anti-backlash nuts allow for compensation as the machine ages

Double nut assembly provides backlash adjustment of longitudinal and cross feed screws to eliminate backlash due to wear

Anti-friction bearings are used throughout the machine
One-shot central lubrication system provides oil to all sliding surfaces, nuts and leadscrews
Complete flood coolant system is standard equipment. Pump is located on top of reservoir machine base inside the column
Standard base chip pan as options
Voltage required for 220V/440V/3 Phase/60 Hz., prewired 220V
Stock Number





Table Size (in.)

10 x 44

Table T-slot (in./W x No. x Pitch)

5/8 x 3 x 2-1/2

Weight on Table (max./lbs.)


Table Longitudinal Travel - X-axis,
Manual/with Power Feed (in.)
Table Cross Travel - Y-axis (in.) 16
Table Knee Travel - Z-axis (in.) 16

Ram Travel (in.)


Spindle Taper


Quill Diameter (in.)


Quill Travel (in.)


Number of Spindle Speeds

Infinite Variable Speed

Range of Spindle Speeds (RPM)

55 - 4,250

Power Quill Feeds (in./rev.)

0.0015, 0.003, 0.006

Head Tilt, Front/Rear ± 45o
Head Swivel, Left/Right ± 90o
Distance Spindle to Table (max./in.) 18

Distance Spindle to Column (min./in.)


Distance Spindle to Column (max./in.)


Column Turret Diameter, Graduated (in.) 15
Knee Width (in.) 11-1/2
Knee to Column Bearing Length (in.) 18
Saddle and Table Bearing Length (in.) 20
Ram and Turret Bearing Length (in.) 19
Ram Length (in.) 36
Main Motor 3 HP,
220V/440V/3 Phase,
Prewired 220V
Overall Dimensions (in./W x D x H) 61-1/2 x 63 x 104
Net Weight (lbs.) 2,750
Hardened and Ground Table Surface and Ways
Draw Bar
One-shot Lubrication System
Complete Flood Coolant System
Tool Box with Tools
OPTIONAL ACCESSORIES - Please call for more detail information
NEMA Type Control Box for 220V/440V/3 Phase/60 Hz. and 110V Electrics with Disconnect Switch
NEMA/NFPA-79 Controls for 220V/440V/3 Phase/60 Hz. and 110V Electrics with Disconnect Switch
Safety Guards to Meet Intent of OSHA
Duplex 110V/1 Phase Outlet on Control Box
NST-30 Spindle Taper with Installation
NST-40 Spindle Taper with Installation
Erickson® Threaded Spindle Nose, Less Nut
Erickson® Quick Change Lock Nut and Wrench
Standard Series Air Power Draw Bar with Installation
Heavy Duty Series Electro/Pneumatic Power Draw Bar
with Installation
X and Y-axis Precision Ball Screws with Yoke with Installation
X-axis Power Feed with Installation
Y-axis Power Feed with Installation
Knee-axis Power Feed with Installation
Extension for X-axis Power Feed with Installation
Safety Hand Crank for Power Feed
4" Riser Block with Installation
8" Riser Block with Installation
12" Riser Block with Installation
Plastic Chip Shield, Spindle Mount with Micro Switch
Cross and Vertical Way Covers
Halogen Work Light
Automatic Lubrication System with Installation
Air Operated Mist Coolant System
Electric Operated Mist Coolant System
Standard Base Chip Pan
Right Angle Milling Attachment with Arbor Support
Multi Angle Attachment
Slotting Vertical Shaping Attachment
Slotter Tool Kit
Horizontal/Vertical Rotary Table
Tailstock for Horizontal/Vertical Rotary Table
Milling Machine Vise with Swivel Base
Clamping Kit
R-8 Round Collet Set
ER Collet Chuck System Complete Kit
End Mill Adapter Set
Shell End Mill Adapter Set
Keyless Drill Chuck and Arbor
Static Phase Converter
Rotary Phase Converter
Digital Readout System with Installation

Terms and Conditions
Copyright© 2000, 2007 The Tool Company, Inc. - All rights reserved.